Technical Specifications - Orbea BLUE PAPER AVANT H DISC 2021 Technical Manual

18 | OR B EA
TECH N I CAL SP E CI F I CAT I O NS
MATERIAL
Frame
Fork
Recommended use
Available sizes
Stem
Fork rake
Maximum number of headset spacers
Fork steerer tube
Fork lenght (axle-to-crown)
Headset
bearings
Wheel size
Maximum
tyre width
Bottom bracket
Bottom bracket shell width
Front hub standard
Front axle measurements
Front axle thread pitch
Front axle thread lenght
Rear hub standard
Rear axle measurements
Rear axle thread pitch
Rear axle thread lenght
Seatpost diameter
Seatpost clamp diameter
Seatpost maximum
insertion
Front derailleur
Front derailleur angle
Maximum chainring size
TECHN ICA L MAN UAL
HYDROFORMED ALLOY
Blades and crown: CARBON
Steerer tube: ALLOY
ENDURANCE ROAD
47/49/51/53/55/57/60
Orbea components. Headset internal cabling only
48mm (SIZES 47, 49, 51) and 43mm (SIZES 53, 55, 57, 60)
40mm
TAPERED 1" 1/8-1" 1/2
370mm
UPPER 1" 1/2 (WITH 1-1/2" to 1-1/8" FOR INTERNAL CABLING)
LOWER 1" 1/2
700C. 28"
700x35C
Tyre maximum external diameter: 702mm
Tyre maximum external width: 35.5mm
BSA 1.37". THREADED
68mm
12x100mm
12x119mm
DOUBLE LEAD THREAD "MAVIC SPEED RELEASE" 2P1.0
13mm
12x142mm
12x165mm
DOUBLE LEAD THREAD "MAVIC SPEED RELEASE" 2P1.0
15mm
27.2mm
31.8mm
47= 250mm
49= 260mm
51= 275mm
53= 305mm
55= 330mm
57= 355mm
60= 380mm
DOWNPULL. BRAZE-ON. Removable front mech hanger
From 73º to 74.5º
53T
B LUE PAPER AVANT · H DISC 2021
Oval chainring compatible
Maximum oval chainring compatible
Triple chainring compatible
Chainline
Minimum Q-factor
Maximum crank lenght
Rear derailleur
Transmission compatibility
(only disc brake groupsets disco)
Front brake
Maximum front rotor diameter
Rear brake
Maximum rear rotor diameter
Rear caliper flat mount bolt lenght
(chainstay height = 25mm)
Cabling
Bottle holder
Compatible DI2 and EPS
Mudguard thread
on frame
Rear rack compatible
Child seat compatible
Trailer compatible
Powermeter
compatibility**
UCI legal
* Not all calipers and rotors in the market are compatible with all frames. All componets specificated from Orbea have been tested.
For aftermarket options, check componentes dimensions and tolerances befores purchasing.
** For other powermeters, consult the compatibility and dimensions with the manufacturer.
YES
51T
NO
50mm
146mm
175mm
STANDARD AND DIRECT MOUNT
SHIMANO 8S, 9S, 10S, 11S
SRAM 10S, 11S, 12S
CAMPAGNOLO 10S, 11S, 12S
DISC. FLAT MOUNT*
160mm
DISC. FLAT MOUNT*
160mm
SHIMANO: 38mm
SRAM: 32mm
Internal (brakes and gears) in headset and downtube
External on chainstays
Full sleeve
Internal front brake routing in fork
2 In all sizes
Di2 YES. SEATPOST INTERNAL BATTERY ONLY. The rear derailleur cable
must be attached to the chainstay with zipties
EPS NO
YES, on rear dropouts. With bridge adapter on seatstays
Integrated threads on front axle
NO
NO
NO
SRM: YES
POWER2MAX: YES
STAGES: YES
ROTOR POWER: YES
PIONEER: YES
QUARQ: YES
LOOK AND POLAR: YES
NO
O RB EA | 19
EN