Set Up The Hardware - Allen-Bradley Rockwell Automation 1734-AENT User Manual

What This Chapter Contains

Set Up the Hardware

25
Configure the Adapter for Direct Connection
in RSLogix 5000 Software
In this example, a ControlLogix controller communicates with POINT I/O
modules via the 1734-AENT adapter using a direct connection.
The adapter makes a direct connection to each of the modules referenced by
the data. The modules presented in this chapter use RSLogix 5000 software,
version 11.
Topic
Set Up the Hardware
Create the Example Application
Configure the I/O
Add the Local EtherNet/IP Bridge to the I/O
Configuration
Add the POINT I/O Adapter to the I/O Configuration
Add the POINT I/O Modules to the I/O Configuration
Add the Relay Output Module
Add the Digital Output Module
Edit the Controller Tags
Create the Ladder Program
Download the Program to the Controller
Verify the Module Chassis Size
Configure the Adapter with Fixed IP Address
Recover From an Overloaded Adapter
You must use series C POINT I/O modules with the 1734-AENT
ATTENTION
adapter. Series A or B POINT I/O modules will not work with
this adapter.
In this example, a ControlLogix chassis contains the Logix5555 processor in
slot 1 and a 1756-ENBT bridge module in slot 3.
Chapter
Page
25
26
27
28
30
33
33
36
38
39
39
41
38
44
Publication 1734-UM011D-EN-P - May 2011
4