50
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
Publication 1734-UM011D-EN-P - May 2011
The Module Properties dialog opens.
6. Enter values for Name, IP Address, Slot, Electronic Keying, and
Revision, noting we used the following values:
Name
IP Address
Slot
Electronic Keying
Revision
7. Click Finish to accept the configuration.
Add the POINT I/O Adapter to the I/O Configuration
Next, you must add the 1734-AENT adapter as a child of the local
1756-ENBT module.
1. In the Project dialog, right-click the local 1756-ENBT module under the
I/O Configuration folder, and select New Module from the dialog.
Local_ENB
10.88.70.4
3
Compatible Module
1.1