Add The Point I/O Adapter To The I/O Configuration - Allen-Bradley Rockwell Automation 1734-AENT User Manual

30
Configure the Adapter for Direct Connection in RSLogix 5000 Software
Publication 1734-UM011D-EN-P - May 2011
The New Module dialog opens.
6. Enter values for Name, IP Address, Slot, Electronic Keying, and
Revision, noting that we used the following values:
Name
IP Address
Slot
Electronic Keying
Revision
7. Click OK to accept the configuration.
The Module Properties dialog opens.

Add the POINT I/O Adapter to the I/O Configuration

Next, you must add the 1734-AENT adapter as a child of the local
1756-ENBT module.
1. In the Project dialog, right-click the local 1756-ENBT module under the
I/O Configuration folder, and select New Module from the dialog.
Local_ENB
10.88.70.4
3
Compatible Keying
3.1