What This Chapter Contains
Identify Adapter
Components
9
Install the Adapter
This chapter describes how to physically install the adapter on the DIN rail
and connect it to the EtherNet/IP network. The following table lists where to
find specific information.
Topic
Identify Adapter Components
Mount the Adapter on a DIN Rail Before Installing
Modules
Mount or Replace the Adapter to an Existing System
Wire Your Adapter
Mounting Dimensions
You must use series C POINT I/O modules with the 1734-AENT
ATTENTION
adapter. Series A or B POINT I/O modules will not work with
this adapter.
Use the figure to identify the external features of the adapter.
LED indicators
Node address
thumbwheel
EtherNet
network
DIN rail
RJ45
locking screw
connector
(orange)
Chapter
Page
9
10
11
12
13
Safety end cap
RTB
removable
handle
Removable Terminal
Block (RTB)
31533-M
Publication 1734-UM011D-EN-P - May 2011
2