Bosch KTS 200 Operating Instructions Manual page 29

 The download is implemented.
$
Try again: If download does not commence auto-
matically, it can be started manually.
$
Proceed: The stopped download is resumed.
$
Pause: Download is stopped.
$
Cancel: Download is terminated. Data already
downloaded will then be deleted.
"
Following successful completion of downloading, the
"Online updates" dialog window displays the message:
"ESI[tronic] Startcenter" software update
has been downloaded. Do you now wish to
install the "ESI[tronic]
software update?
Installing ESI[tronic] Startcenter software update
1. Select <Yes>.
i
If installation is to be performed at a later point in
time, <No> must be selected.
For installation in the ESI[tronic] Startcenter, select
"Extras >> Online updates" again and log on with
customer number and password.
2. Select the installation language.
i
The installation language selected is the ESI[tronic]
Startcenter language.
3. Select <OK>.
4. Heed the information on the screen and follow the
instructions.
 The software update for ESI[tronic] Startcenter is
installed.
5. Following successful installation: Start the
ESI[tronic] Startcenter.
Robert Bosch GmbH
Downloading KTS ��� software update
!
The Windows operating system USB driver installa-
tion routine is not to be implemented when connec-
ting the KTS 200 to the PC/Laptop. The ESI[tronic]
Startcenter installation routine automatically installs
a USB driver to permit communication between the
KTS 200 and the PC/Laptop.
1. Disconnect the USB connecting cable and power
supply from the KTS 200.
2. Deactivate standby mode on the PC/Laptop.
3. Connect the KTS 200 module to power using the
power supply provided.
 The KTS 200 starts up and sticks on the start
screen.
4. Connect the KTS 200 module with the PC/Laptop
using the USB connection cable.
5. ESI[tronic] Startcenter start screen: Select "Extras
>> Online updates".
 The "Online updates" dialog window appears.
6. Enter the customer number and password and
select <Continue>.
 The link with the Bosch download server is esta-
blished.
Startcenter"
i
If "Login" is not possible, check your proxy settings
under "Settings >> User settings".
7. Confirm the message
available for download. Download now?
with <Yes>.
(If the message
ble. The version installed is the most
recent.
 The download is implemented.
$
Try again: If download does not commence auto-
matically, it can be started manually.
$
Proceed: The stopped download is resumed.
$
Pause: Download is stopped.
$
Cancel: Download is terminated. Data already
downloaded will then be deleted.
Operation | KTS ��� | �� KTS ��� | ��
A new version is
No software update availa-
appears: End online update with <OK>.)
1 689 989 001
| �� en
|
2012-03-16