Symbols Used; In The Documentation; Warning Notices; Symbols In This Documentation - Bosch KTS 200 Operating Instructions Manual

1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequen-
ces of the hazard as well as preventive action. Warning
notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impend-
ing danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.�

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermedi- An instruction produces a visible inter-

ate result mediate result.
Final result There is a visible final result on comple-
"
tion of the instruction.
1.�

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Robert Bosch GmbH
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | KTS ��� | 1�
2.

User information

�.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
TEST EQUIPMENT". These instructions must be carefully
studied prior to start-up, connection and operation of
the KTS 200 and must always be heeded.
�.�

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Bosch TEST EQUIPMENT". These instructions
must be carefully studied prior to start-up, connection
and operation of the KTS 200 and must always be heed- KTS 200 and must always be heed-
ed.
�.�

Electromagnetic compatibility (EMC)

The KTS 200 satisfies the requirements of the EMC di-
rective 2004/108/EG.
i
The KTS 200 is a class/category A product as de-
fined by EN 61 326. The KTS 200 may cause high-fre-
quency household interference (radio interference)
so that interference suppression may be necessary.
In such cases the user may be required to take the
appropriate action.
�.4

Open Source software

An overview of the Open Source software licenses for
is available on the "ESI[tronic] Startcenter"
the KTS 200 is available on the " KTS 200 is available on the "
DVD as an Adobe PDF document.
KTS ��� | 1� | 1� en
and must always be heed-
|
1 689 989 001 2012-03-16