Secure Cylinder; Inside Escutcheon - Assa Abloy Corbin Russwin FE6600 Series Installation Instructions Manual

FE6600 and BL6600 Series
Multi-Point Lock
Installation Instructions
3 Installation (continued)
d

Secure Cylinder

1. With the cylinder screwed flush into the
escutcheon face, check that the keyway is
vertical. This ensures that the cylinder retainer
fork will line up with the notch on the side of
the cylinder.
2. Tighten the cylinder retainer to secure the
cylinder.
3. Turn the key in the cylinder to make certain
that the lock functions correctly.
4. Secure the outside front plate to the lockbody.
(Figure 9)
e

Inside Escutcheon

1. Place inside escutcheon flat against door. Align
thumb turn (if provided) with slot in lock body.
(Figure 10)
2. Secure the inside escutcheon to the outside
escutcheon using thru-bolt screws provided.
(Figure 11)
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 9
Figure 10
Figure 11
5
FM467 03/20