Operation Manual of MAV555 & DMAT for Super Motion System
Operation Manual of MAV555 & DMAT for Super Motion System
1. Scope
This document describes how to set up and operate Sony MAV555 and DNF
Motion System. This document is based on MAV555 super motion configuration with ver2.00SSbeta4 and
DMAT ver4.0 020101. You can get DMAT manual from DNF web site.
2. General Procedure
Following is a general procedure to use MAV555 and DMAT controller.
Items in parentheses are not necessary once they are done.
PREPARATION
Power On MAV555 and DMAT
(Setup of MAV555 and reboot MAV555 if necessary to validate setup)
(Select LTC for time code display at each port with Meter Panel.)
Clear unnecessary materials from MAV555.
(Setup DMAT)
Clear CLIP and PLAYLIST information from DMAT.
Decide Loop Recording Length
Start Recording with DMAT
OPERATION
Slow Replay, MARK CUE, Create CLIP, Create PLAYLIST
MELTING and TEAR DOWN
Stop Precording
Melting materials to Tape
Power Off MAV555 and DMAT
1
DNF CONTROLS: www.dnfcontrols.com
2
DMAT stands for Don't Miss a Thing.
- 3 -
1
2
DMAT
controller for Super