Maintenance - DAL-BO PowerRoll 1030 Manual

Maintenance:

Standard
Optional extra
Retighten all screw connections, including hub nuts, after the first day of
work.
Chassis - 12 lubrication points - lubricate daily.
Roller bearings - 10 - lubricate every 50 working hours.
Lubricate the wheel bearings once a season by removing the hub caps and
greasing. It is advisable to adjust the bearings before lubrication.
*For rollers fitted with air brakes:
Brake key - 2 lubrication points - lubricate once a season. Do not
overlubricate, as this can damage the brakes.
Adjust the wheel bearings once a season. Follow the instructions for
replacing wheel bearings, points 1, 2, 11, 12 and 13.
Stopring adjustment. After the first season the surface of the stoprings will
be worn smooth, so they will take up slightly less space. Adjust the play
which has been created, down to max. 5 mm by moving the stoprings, see fig.
6. Remember to do the stopring screws up tightly. It is advisable to undo and
tighten the screws a few times so that they grip better.
Fig. 5
Tyre
Tread AW
15.0/55-17 10 PLY
19.0/45-17 10 PLY
When parking for a fairly long time under damp conditions, projecting
piston rods should be greased to prevent rust.
11
Width
mm 6/160/205
391 13.00x17
450 16.00x17
Rim Max. air pressure
(bar) at 30 kph
3.50
3.00