Table of Contents
Advertisement
Maintenance:
REPAIRS:
Wheels:
Tighten all the screws, and also hub nuts, after the first working day.
Chassis - 3 lubrication points - lubricate daily.
Roller bearings - 6 units - lubricate every 50 operating hours.
Lubricate the wheel bearings once per season.
Adjust the wheel bearings once a year, following the instructions for replace-
ment of bearings, points 1, 2, 8, 9, 10 and 11.
After the first season the surface of the rings will have worn smooth and they
will therefore take up slightly less space. Adjust the resulting clearance down
to max. 5 mm by moving the stop rings (see fig. 1). Remember to tighten the
stop ring screws well. It is advisable to slacken and retighten the screws a
couple of times so that they grip better.
Fig. 1:
Check the air pressure in the tyres before the season. It should be 5.2 bar.
If the Compact is parked outdoors for a prolonged period it should be
left in the operating position in order to avoid rust damage to the piston
rods.
For prolonged indoor parking in the transport position, the piston rods should
be lubricated with oil or grease.
For changing wheels owing to punctures, etc., set the machine in the operating
position. This enables the wheel to be removed without using a jack.
Changing the wheel bearings, see fig. 2.
6
Advertisement
Table of Contents
