Hydraulic System; Hitching; Maintenance And Repairs - DAL-BO MaxiDisc Manual

Hydraulic System










Hitching

Maintenance and Repairs




Side 8
Never allow bystanders within the operating radius of the MaxiDisc when the
hydraulic system is activated to prevent individuals from the danger of being
crushed.
Before performing maintenance or repairs on the hydraulic system, lower the
implement to the ground, relieve pressure in the system, turn off the engine and
remove the ignition key.
Clean the hydraulic fittings thoroughly before connection. Ensure that the pres-
sure is relieved in the hydraulic system before connecting the hydraulic hoses to
the tractor's hydraulic services.
After making repairs to the hydraulic system, thoroughly bleed air out of the sys-
tem.
Regularly check hydraulic hoses for defects such as cracks, bends, chafing or
leaks. Replace defective hoses immediately.
Avoid spilling oil on the ground. In case of spills, collect the oil and dispose of it
properly.
In case skin should come in contact with hydraulic oil or grease or in case cloth-
ing should become stained with oil, remove the stained clothes immediately and
wash the affected skin areas thoroughly. Oil and grease are harmful to the skin.
Escaping hydraulic oil under high pressure can penetrate the skin and cause se-
vere injury. If an accident occurs, see a doctor immediately.

An individual is in danger of being crushed during the hitching process. Never
place yourself or anyone else between the tractor and the MaxiDisc, or between
parts that must be attached or connected.
Before servicing or making adjustments to the machine, securely block or unfold
the machine, engage the tractor and machine brakes, turn off the engine and re-
move the ignition key.
Tighten all nuts, bolts hydraulic fittings or any other fastened assemblies after a
few hours' use. Check often to make sure that they remain thoroughly tightened.
Inspect all pins, screws and bolts for wear or damage and make sure that all are
securely in place to avoid any possible damage or breakdown of the machine.
Dispose of oil, grease and filters according to applicable environmental regula-
tions.
MaxiDisc