Table of Contents
Advertisement
Congratulations on your new PowerRoll. For safety reasons and to make the
best possible use of the machine, you should read the following instructions
before putting it into operation.
©
Copyright 2002. All rights reserved, DAL-BO A/S
Points, which are of importance with regard to safety are marked
Using the roller with a non-original hydraulic circuit will invalidate the warranty.
Dal-Bo cannot be held liable for damage caused by a non-original hydraulic circuit.
Tighten all screw connections after a few hours' use.
The hydraulics must not be operated unless the roller is properly connected to a tractor.
The machine must only be operated from the tractor. There must be no-one in the
immediate vicinity of the roller.
The roller must not be operated by children.
The driver is responsible for ensuring that the roller is correctly marked in accordance with
the current Road Traffic Act.
The driver is responsible for the tractor used being large enough to handle the roller
properly. A minimum of 130 HP (97 kW) is recommended.
Your PowerRoll has:
Serial number:
Month of manufacture:
Please always quote the serial number when making inquiries about spare parts or service.
There is a list of spare parts at the back of the booklet which provides a summary of the roller's
individual parts.
EU COMPLIANCE DECLARATION
Declares herewith that the above machine is manufactured in accordance with the provisions of
directive 2006/42/EC, which replaced directive 98/37/EC and change directives 91/368/ECC,
93/44/ECC and 93/68/ECC on harmonization of member state legislation concerning health and
safety requirements related to the construction and manufacture of machines.
This machine corresponds to the safety requirements in the European Safety Guidelines.
DAL-BO A/S
Managing Director Kaj Pedersen
DAL-BO PowerRoll 1030 & 1230 cm
DAL-BO A/S
DK-7183 Randbøl
CE
3
.
Type designation:
.
Net weight kg:
Date:
.
.
.
Hide quick links:
Advertisement
Table of Contents
