Application; Noise; Dust - DAL-BO PowerRoll 1030 Manual

Application:





Noise:

Dust:


The PowerRoll is used before and after sowing to break up clods and press
down stones. It also creates good contact between seed and soil, ensuring
uniform crop germination.
The roller can also be used to advantage after stubble tilling to promote
conversion of plant residues and the germination of waste and weed seeds.
The PowerRoll can also be used for rolling pasture. Rolling presses stones
down and flattens out any molehills and irregularities so that they will not
hamper any future working in the field.
Rolling also breaks up the surface crust and increases the air supply to the
roots.
The PowerRoll must not be used as a transporter, pile driver, hydraulic press
or the like. If in doubt, ask your dealer or DAL-BO.
The PowerRoll must not be used for rolling roads or similar hard surfaces.
When operating the roller, the user must sit in the driver's seat of the tractor,
and there must be no-one on the roller or in its immediate vicinity.
The roller may make a little noise during rolling, particularly if the Cambridge
rings are worn. It will be well below the danger level for the tractor driver,
however.
Rolling in very dry conditions may generate a great deal of dust. It is
advisable to close the tractor's windows/doors and use the tractor's air-
conditioning system, or to use a dust mask.
5