Hydraulics; Assembly; Maintenance And Repairs - DAL-BO Maxiroll Greenline Lift 300 Manual

Hydraulics

 Lower machine fully for any repair work on the hydraulic system. Relieve
 Clean hydraulic connections thoroughly before reconnecting. When
 It can be difficult to completely depressurise hydraulic systems with pilot-
 Bleed the hydraulic system thoroughly after any repairs.
 Check hydraulic hoses regularly for defects such as cracks, splits, crimps,
 Avoid spilling oil on the ground. If oil is spilt, collect and deliver to a
 Clean hands thoroughly after contact with oil and grease. Change oil-
 Hydraulic oil released under high pressure can penetrate the skin and

Assembly

Maintenance and repair
 Ensure machine is adequately supported for all repair and maintenance
 Tighten all screw connections after a few hours use. Check all screw
 Dispose of oil, grease and filters in accordance with local environmental
Page 8
Maxiroll Greenline Lift
hydraulic pressure, switch engine off and remove ignition key.
connecting hydraulic hoses to tractor hydraulics, ensure they are not under
pressure.
controlled non-return valves. Hold a cloth around the fittings/part to be
removed to catch any oil.
wear or breaks. Defective hoses must be replaced immediately.
destruction point.
stained clothing immediately. Hydraulic oil can be harmful to the skin.
cause severe injury. In the event of injury, seek medical help immediately.
 Danger of crushing! Ensure no personnel are between implement and
tractor, or between the parts to be connected.
work. Ensure tractor and machine are properly braked, engine stopped and
ignition key removed.
connections regularly and tighten as required. Check all split pins and
bolts to avoid mechanical failure.
protection rules.