Report Setting; Report Setting Items; Selecting Whether To Automatically Print Out A Activity Report; Selecting Whether To Automatically Print Out A Reservation Report - Konica Minolta bizhub 225i User Manual

7
7.6

Report setting

Configure settings to automatically print out various reports for fax communication.
7.6.1

Report setting items

Number
1
2
3
4
d
Reference
Report settings can also be configured using LSU (Local Setup Utility). For details, refer to page 11-4.
Settings can also be configured using Web Connection. For details, refer to Web Connection - [Address] -
[Fax Configuration] of [User's Guide Network Administrator].
7.6.2

Selecting whether to automatically print out a Activity Report

1
Press the Utility key.
2
Use the +/, key to select [REPORTING], then press the OK key.
3
Use the +/, key to select [ACTIVITY REPORT], then press the OK key.
4
Use the +/, key to select [OFF] or [ON], then press the OK key.
This returns to the report settings screen.
7.6.3

Selecting whether to automatically print out a reservation report

1
Press the Utility key.
2
Use the +/, key to select [REPORTING], then press the OK key.
3
Use the +/, key to select [RESERVATION REPORT], then press the OK key.
4
Use the +/, key to select [OFF] or [ON], then press the OK key.
This returns to the report settings screen.
7-28
Report setting
[ACTIVITY REPORT]
[RESERVATION
REPORT]
[TX RESULT REPORT]
[RX RESULT REPORT]
Contents
Prints out the sending and receiving result as a report every 60
communications. Select whether to print out a report automati-
cally when 60 communications are reached.
• The factory default is [ON].
Prints out the reserved information as a report when you estab-
lish communications with multiple destinations by sequential
broadcast transmission or polling RX. Select whether to auto-
matically print out a report.
• The factory default is [OFF].
Prints out the transmission result as a report after a transmission
has been completed. Select whether to automatically print out a
report.
• The factory default is [OFF].
Select whether to print out a report automatically after a confi-
dential reception has been completed. (If a normal reception has
not been completed properly, a report is output regardless of
this setting. )
• The factory default is [OFF].
Report setting 7.6
bizhub 225i