Konica Minolta bizhub 225i User Manual page 75

4 Specify a relay distribution station for transmission (Relay Instruction transmission)
5
Specify a relay distribution station, then press the OK key.
% For details on how to specify a relay distribution station, refer to page 3-8.
6
Enter a Relay User Box ID using the Keypad, then press the OK key.
% Enter a Relay User Box ID registered in a relay distribution station with up to 20 digits.
% The characters available for a Relay User Box ID are only 0 to 9, *, and #.
% To correct a numeric value, press the Clear/Stop key.
7
Enter the password using the Keypad, then press the OK key.
% If a password is specified for a relay distribution station, enter it with up to 20 digits.
% The characters available for a password are only 0 to 9, *, and #.
% To correct a numeric value, press the Clear/Stop key.
8
Press the Start key.
This starts scanning and sending.
4-13
RELAY INITIATE
RELAY BOX ID
PASSWORD
4.5
bizhub 225i