Utility Settings - Konica Minolta bizhub 225i User Manual

7.1

Utility settings

7 Utility and Fax Settings
7.1 Utility settings
The Utility screen provides five fax setting items.
Tips
Some items cannot be configured depending on which optional device is installed on this machine. If an item
that cannot be configured is selected, an error message appears.
Number
1
2
3
4
5
d
Reference
The items above, excluding number 2, can also be configured using LSU (Local Setup Utility). For details, refer
to page 11-4.
d
Reference
For details on the following settings, refer to [User's Guide Copy Operation].
[MACHINE SETTING]: Set up the operating environment of this machine.
[PAPER SOURCE SETUP]: Specify the size and type of paper loaded in Tray 1.
[CUSTOM SIZE MEMORY]: Register a custom size.
[DRUM DEHUMIDIFY]: Perform maintenance operations to prevent a function reduction.
[ADMIN. MANAGEMENT]: Configure management settings for each account track, or specify the sleep mode.
[COPY SETTING 1/2]: Configure default settings of each copy function.
[CONFIRM MODE]: Confirm the counter or communication result.
d
Reference
For details on the following settings, refer to [User's Guide Scan].
SCAN SETTING: Configure scanner settings.
In addition to number 1 to number 5, the following items can be configured if FAX Kit FK-510 is installed on
this machine. Press the Utility key, and configure the following settings as necessary.
bizhub 225i
Name
[DIAL REGISTRATION]
[FAX REGISTRATION]
[FAX TX OPERATION]
[FAX RX OPERATION]
[REPORTING]
Description
Register destinations in the one-touch dial,
speed dial, and group dial.
Configure the default settings for each fax func-
tion.
Configure the default settings for transmission
operations.
Configure the default settings for receiving oper-
ations.
Configure the default settings for each report
function.
7
Reference
page
p. 7-6
p. 7-17
p. 7-21
p. 7-23
p. 7-28
7-3