Specifying The Transmission Time (Specified-Time Transmission) - Konica Minolta bizhub 225i User Manual

3
3.12

Specifying the transmission time (Specified-time transmission)

The function that specifies a communication time is referred to as a specified-time transmission. Costs can
be cut by transmitting faxes in the late evening or early morning when discount telephone services are avail-
able.
Tips
-
Enter the time using the 24-hour system.
-
If the current time is not registered accurately, data cannot be sent at the specified time. For details on
how to specify the current time, refer to page 2-12.
-
The specified-time transmission can be specified with the sequential broadcast transmission, confiden-
tial transmission, polling reception, and relay instruction transmission.
-
The specified-time transmission cannot be used together with the immediate transmission.
1
Load the original.
2
When necessary, specify a image quality.
% For details on Quality, refer to page 3-7.
3
Specify a destination.
% For details on how to specify a destination, refer to page 3-8.
4
Press the , key.
The other setting screen appears.
5
Use the +/, key to select [TIMER SETTING], then press the OK key.
6
Enter the transmission time using the Keypad, then press the OK key.
7
Use the +/, key to select [RETURN], then press the OK key.
This returns to the transmission screen.
8
Press the Start key.
This starts scanning, and changes to the transmission standby state.
d
Reference
A transmission reservation can be canceled. For details, refer to page 3-20.
3-25
Specifying the transmission time (Specified-time transmission)
FAX OTHER SETTING
TIMER
3.12
bizhub 225i