Tyre Pressure Outside The Permitted Tolerance; Sensor Faulty Or System Fault - BMW F 750 GS Rider's Manual

Hide thumbs Also See for F 750 GS:
Table of Contents

Advertisement

Temperature compensation
(
184)
Tyre pressure outside the
permitted tolerance
with tyre pressure control
(RDC)
OE
flashes red.
The tyre symbol is dis-
played with one or two
arrows. The critical tyre pres-
sure flashes.
WARNING
Tyre pressure outside the
permitted tolerance.
Risk of accident, degradation
of the vehicle's driving char-
acteristics.
Adapt your style of riding
accordingly.
The up arrow indicates a
pressure problem on the
front wheel, the down arrow
indicates a pressure problem
on the rear wheel.
Possible cause:
Measured tyre pressure is out-
side permitted tolerance.
Check the tyre for damage
and to ascertain whether the
vehicle can be ridden with the
tyre in its present condition.
If the vehicle can be ridden
with the tyre in its present con-
dition:
Correct the tyre pressure at
the earliest possible oppor-
tunity.
You can deactivate RDC
warnings for riding in off-
road mode.
Before adjusting tyre
pressure, read the
information on temperature
compensation and adjusting
pressure in the section entitled
"Engineering details".
Temperature compensation
(
184)
Have the tyre checked for
damage by a specialist work-
shop, preferably an authorised
BMW Motorrad Retailer.
If you are unsure whether the
vehicle can be ridden with the
tyre in its present condition:
Do not continue your journey.
Notify the breakdown service.

Sensor faulty or system fault

with tyre pressure control
(RDC)
OE
lights up yellow.
The tyre symbol is dis-
played with one or two
arrows.
41

Advertisement

Table of Contents
loading

Table of Contents