Replacing Main Fuse; Battery Not Connected In Accordance With Correct Procedure; Jumpering Of Blown Fuses - BMW F 750 GS Rider's Manual

222 MAINTENANCE
be entered in the instrument
cluster to guarantee correct
operation of the service display.
Switch off the ignition.
Insert the battery into the bat-
tery compartment, with the
positive terminal on the right
in the direction of travel.
Hold battery holder 5 in posi-
tion.
Install screws 4.
Press in the lock and flip open
positive terminal cover 1.
ATTENTION
Battery not connected in ac-
cordance with correct pro-
cedure
Risk of short-circuit
Always proceed in compli-
ance with specified installa-
tion sequence.
Connect positive battery
cable 2.
Close positive terminal
cover 1.
Install negative battery cable
turned right way round, as il-
lustrated 6, making sure that
there is adequate clearance
between the negative bat-
tery cable and the seat lock-
ing lever.
with anti-theft alarm (DWA)
If applicable, switch on the
anti-theft alarm.
Installing seat (
Set the clock (
Set the date (
FUSES

Replacing main fuse

ATTENTION

Jumpering of blown fuses

Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective
fuse with a new fuse of the
same amperage.
OE
115).
127).
126).