Wetting Of Plastic Surfaces By Fuel - BMW F 750 GS Rider's Manual

ATTENTION
Wetting of plastic surfaces
by fuel
Damage to the surfaces (sur-
faces become unsightly or
dull)
Clean plastic surfaces im-
mediately after contact with
fuel.
Make sure the ground is level
and firm and place the motor-
cycle on its side stand.
with Keyless Ride
Switching off ignition (
The fuel filler cap can be
opened within the defined
waiting time after the ignition
has been switched off, without
the radio-operated key being
within range.
Waiting time for open-
ing the fuel filler cap
2 min
There are two variant ways
of opening the fuel filler cap:
Within the waiting time.
After the waiting time has ex-
pired.
OE
81).
with centre stand
WARNING
Fuel is highly flammable
Risk of fire and explosion
Do not smoke. Never bring
a naked flame near the fuel
tank.
WARNING
Escape of fuel due to heat-
induced expansion if fuel
tank is overfilled
Risk of falling
Do not overfill the fuel tank.
ATTENTION
Wetting of plastic surfaces
by fuel
Damage to the surfaces (sur-
faces become unsightly or
dull)
Clean plastic surfaces im-
mediately after contact with
fuel.
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
with Keyless Ride
Switching off ignition (
The fuel filler cap can be
opened within the defined
waiting time after the ignition
167
OE
OE
81).