Page 1
BMW Motorrad Rider's Manual F 750 GS https://www.motorcycle-manual.com/...
Page 2
Vehicle data/dealership details Vehicle data Dealership details Model Person to contact in Service department Vehicle Identification Number Ms/Mr Phone number Colour code Date of first registration Dealership address/phone number (com- Registration number pany stamp) https://www.motorcycle-manual.com/...
Page 3
We hope you will enjoy riding operate the controls and how to your BMW and that all your jour- make the best possible use of all neys will be pleasant and safe your BMW's technical features.
Page 6
14 Service ....261 Vehicle preservation ..242 Declaration of conformity BMW Motorrad Service . . . 262 Laying up the motor- for TFT instrument BMW Motorrad Service cycle .
Page 7
Declaration of conformity for intelligent emergency call ......316 Declaration of conform- ity for anti-theft alarm sys- tem .
Technical data. If the time comes to sell your voiding of the warranty. BMW, please remember to hand NOTICE Specific instruc- over these operating instructions tions on how to operate, National-market version.
Equipment optional accessories operating instructions are quoted through your authorised When you purchased your BMW to the standards and comply with BMW Motorrad dealer; motorcycle, you chose a model the tolerance requirements of the optional accessories with individual equipment.
Control units process dealer The high safety and quality data that they receive, for ex- Your BMW Motorrad Retailer will standards of BMW motorcycles ample, from vehicle sensors, or be happy to answer any ques- are maintained by constant that they generate themselves or tions you may have.
Page 13
Manufacturer of the vehicle The vehicle owner can also re- corresponding authorities can quest that a BMW Motorrad Re- Qualified service partners be referenced to ascertain the tailer or another qualified service Specialist workshops vehicle owner.
Page 14
Response of the vehicle in Environmental conditions, for The information can be read out special riding situations, for example temperature by a BMW Motorrad Retailer or example engagement of the The data is only processed in another qualified service part- driving dynamics systems the vehicle itself and is gener- ner or specialist workshop.
Page 15
Contacts data for use in con- a BMW Motorrad Retailer or an- the vehicle, for example smart- nection with a communication other qualified service partner or phones, can be controlled using system or an integrated naviga- specialist workshop.
Page 16
that are provided by the vehicle data connection activated or de- formation. This enables optimal use of the selected apps, for ex- manufacturer or by other pro- activated. Statutory functions are ample navigation or music play- viders. excluded from this. back.
Intelligent emergency Protection of personal data: directives for the protection of Directive 95/46/EC of the personal data. call system European Parliament and of the The intelligent emergency call with intelligent emergency Council. system processes personal data call only with the agreement of the Protection of personal data: vehicle owner.
Page 18
Improving quality gency operations centre by the includes, for example, information on when and where an emer- statutory emergency call system The data that is transferred in gency call was made. In excep- eCall. an emergency is also used by tional cases, the log data can be In addition, the intelligent emer- the manufacturer of the vehicle...
Page 19
Data storage part of its statutory obligation, the manufacturer of the vehicle The data for an activated provides information about the emergency call is stored in data that it has processed and the vehicle. The data contains any data that it still has stored. information on the emergency call, for example the location and time of the emergency call.
General view, left side Power socket ( 226) Seat lock ( 117) Setting the damping action 151) Oil filler neck and oil dip- stick ( 190) https://www.motorcycle-manual.com/...
General view, right side Setting the spring preload 150) Brake-fluid reservoir, rear 195) Brake-fluid reservoir, front 194) Vehicle identification num- ber, type plate (on steering head) Coolant level indicator (be- hind the side trim panel) 198) https://www.motorcycle-manual.com/...
Multifunction switch, left High-beam headlight and headlight flasher ( with cruise control Cruise-control system 113). Hazard warning flashers ABS ( 104) ASC/DTC ( 106) with Dynamic ESA Possible settings ( 108) Turn indicators ( Horn MENU rocker button 121) Multi-Controller Controls ( 121) with daytime riding...
Instrument panel Engine speed display, in- dicator and warning lights Multifunction display Photosensor (for adapting the brightness of the in- strument lighting) with anti-theft alarm (DWA) DWA light-emitting diode General information about the anti-theft alarm (DWA) 142) https://www.motorcycle-manual.com/...
Instrument cluster with Connectivity with Connectivity Indicator and warning lights with Connectivity ( TFT display ( Alarm system LED Alarm ( 144) with Keyless Ride Indicator light for the radio- operated key Ignition with Keyless Ride 86). Photosensor (for adapting the brightness of the in- strument lighting) https://www.motorcycle-manual.com/...
Overview, displays Indicator and warning lights with daytime riding light Manual daytime riding light 95). Switch off the ABS func- tion ( 104). - with EU markets ex- port Malfunction indicator lamp Emissions warning ( Turn indicators, left Neutral with cruise control Cruise-control system 113).
Page 33
11 Photosensor with anti-theft alarm (DWA) DWA light-emitting diode General information about the anti-theft alarm (DWA) 142) 12 Auxiliary headlights 13 ASC/DTC ( https://www.motorcycle-manual.com/...
Warning indicator lights If two or more warnings occur at the same time, all the appropri- Mode of presentation ate warning lights and warning Warnings are indicated by the symbols appear, alternating with corresponding warning lights. warning words as applicable. The possible warnings are listed on the next pages.
Page 36
Warnings, overview Indicator and warning Display text Meaning lights Ice crystal symbol Outside temperature warning ( is displayed. Electronic immobiliser active ( General warning EWS warning sym- light shows yellow. bol is displayed. appears on the General warning Radio-operated key out of range ( light shows yellow.
Page 37
Indicator and warning Display text Meaning lights General warning Engine symbol Engine in emergency-operation mode light shows yellow. appears on the display. LAMPF!, LAMPR! General warning Bulb faulty ( or LAMPS! is dis- light shows yellow. played. DWALO! appears on Anti-theft alarm battery weak ( the display.
Page 38
Indicator and warning Display text Meaning lights General warning The tyre symbol is Sensor faulty or system fault ( light shows yellow. displayed with one or two arrows. "--" or "-- --" is Transmission fault ( displayed. RDC! appears on General warning Battery for tyre pressure sensor weak the display.
Page 39
Indicator and warning Display text Meaning lights ASC/DTC indicator ASC/DTC self-diagnosis not completed and warning light slow-flashes. ASC/DTC indicator ASC/DTC switched off ( and warning light comes on. ASC/DTC indicator ASC/DTC fault ( and warning light comes on. lights up Fuel down to reserve ( SOS! SOS ERROR Emergency call fault (...
Page 40
Ambient temperature Possible cause: ture for the first time, irrespective of the actual display setting. The air temperature measured When the motorcycle is at a at the motorcycle is lower than standstill, the heat of the engine In addition, the ice crystal 3 °C.
Page 41
There is no Battery of the radio-operated placed, preferably by an author- assurance of how long the R/C key is flat or the key has been ised BMW Motorrad Retailer. key can remain operational. lost ( 87). Replace the battery of the...
Page 42
Possible cause: specialist workshop, preferably WARNING an authorised BMW Motorrad The coolant temperature is too Retailer. high. Failure of the vehicle sys- If possible, ride in the part-load tems Coolant temperature too range to cool down the engine. Risk of accident...
Page 43
Have the fault rectified by a with daytime riding light specialist workshop, preferably LAMPF!: additionally: daytime The engine control unit has dia- an authorised BMW Motorrad riding light faulty. gnosed a fault. In exceptional Retailer. cases, the engine stops and re- LAMPR!: brake light, rear light, You can continue riding;...
Seek the advice of a specialist Seek the advice of a specialist workshop, preferably an author- Replacing the additional head- workshop, preferably an author- ised BMW Motorrad Retailer. light ( 214). ised BMW Motorrad Retailer. Tyre pressure Anti-theft alarm battery...
Page 45
For more information on the is the rear tyre pressure. " " ance. BMW Motorrad RDC system appears directly after the ignition Correct the tyre pressure as of tyre pressure monitoring, see is switched on. The sensors do stated on the inside cover of 183).
Page 46
Check the tyre for damage (RDC) workshop, preferably an and to ascertain whether the authorised BMW Motorrad General warning light vehicle can be ridden with the Retailer. flashes red. tyre in its present condition.
Page 47
Have the fault rectified by a Have the fault rectified by a A permanent fault is specialist workshop, preferably specialist workshop, preferably present only when the an authorised BMW Motorrad an authorised BMW Motorrad general warning light also lights Retailer. Retailer. Under these circumstances:...
Page 48
Pull away slowly. Bear in mind This error message shows briefly an authorised BMW Motorrad that the ABS function is not only after the Pre-Ride-Check dealer. available until self-diagnosis has completes.
Page 49
ASC/DTC switched off specialist workshop, preferably after the critical situation has ASC/DTC indicator and an authorised BMW Motorrad been dealt with. warning light comes on. dealer. ASC/DTC self-diagnosis Possible cause:...
quent braking and accelerating), Service-due indicator WARNING the harder it is to determine the fuel reserve. For this reason, it is Irregular engine operation or not possible to accurately state engine shutdown due to lack the fuel reserve volume. of fuel Risk of accident, damage to cata- The range is displayed lytic converter...
Page 51
'Gener- an authorised BMW Motorrad al' warning light showing yellow. Retailer. The SERVD! or SERVT! mes- sages are displayed permanently.
Page 52
A countdown 1 is displayed be- The message 1 is displayed if it The messages SOS!I 1 and SOS low the SOS 2 message while the was not possible to establish a ERROR 2 are displayed if emer- connection is being established. connection.
Page 53
The upshift recommendation 1 signals the economically best point in time for upshift. https://www.motorcycle-manual.com/...
Overview, displays with connectivity Indicator and warning lights with Connectivity with Connectivity Turn indicators, left Operating the turn indicat- ors ( 97). High-beam headlight General warning light Turn indicators, right - with EU markets ex- port Malfunction indicator lamp Emissions warning ( ASC/DTC ( ABS ( 104)
Page 56
TFT display in Pure Ride view with Connectivity Change of operating focus 125) Rev. counter ( 127) Driver info. status line 126) Speedometer Riding mode ( 111) Recommendation to up- shift ( 128) Gear indicator; "N" indic- ates neutral. Speed Limit Info ( 127) with cruise control Cruise-control system...
Page 57
14 Heating stages, handlebar grips ( 116) 15 Automatic daytime riding light ( 16 Outside temperature warn- ing ( 17 Ambient temperature https://www.motorcycle-manual.com/...
Page 58
TFT display in view menu with Connectivity Speedometer with cruise control Cruise-control system 113). Speed Limit Info ( 127) Riding mode ( 111) Driver info. status line 126) Recommendation to up- shift ( 128) Gear indicator; "N" indic- ates neutral. Clock Connection status 10 Muting (...
Page 59
15 Ambient temperature 16 Menu section https://www.motorcycle-manual.com/...
Indicator lights with Connectivity Mode of presentation Warnings are indicated by the corresponding warning lights. Warnings are indicated by 'Gen- eral' warning light showing in combination with a dialogue in the TFT display. The 'Gener- Check Control display Values display al' warning light shows yellow or Symbols 4 differ in how they The messages differ in how they...
Page 61
You can go to the message Red: (Hot! / High!) Current temperature or value is too again as long as the fault per- high. sists. White: (---) No valid value avail- able. Dashes 5 are displayed instead of a numerical value. NOTICE The assessment of some values Check Control dialogue...
Page 62
Warnings, overview Indicator and warning Display text Meaning lights Ice crystal symbol Outside temperature warning ( is displayed. Remote key not General warning Radio-operated key out of range ( in range. light shows yellow. Remote key bat- General warning Replacing battery of radio-operated key light shows yellow.
Page 63
Indicator and warning Display text Meaning lights General warning The faulty light Bulb faulty ( light shows yellow. source is displayed. Alarm system Anti-theft alarm battery weak ( battery weak. Alarm system General warning Anti-theft alarm battery flat ( battery empty. light shows yellow.
Page 64
Indicator and warning Display text Meaning lights General warning is displayed in yel- Tyre pressure in limit range of the per- light shows yellow. low. mitted tolerance ( Tyre pressure is not at set- point. is displayed in red. Tyre pressure outside the permitted tol- General warning light flashes red.
Page 65
Indicator and warning Display text Meaning lights Drop sensor Drop sensor defective ( faulty. Intell. emerg. Emergency call function restricted call failure. Side stand mon- Side stand monitoring is faulty ( itoring faulty. ABS indicator ABS self-diagnosis not completed and warning light flashes.
Page 66
Indicator and warning Display text Meaning lights ABS indicator ABS Pro fail- ABS Pro failed ( and warning light ure! shows. ASC/DTC indicator ASC/DTC intervention ( and warning light flashes quickly. ASC/DTC indicator ASC/DTC self-diagnosis not completed and warning light flashes slowly.
Page 67
Indicator and warning Display text Meaning lights General warning Spring strut DESA fault ( light shows yellow. adjustment faulty! Fuel reserve Fuel down to reserve ( reached. Go to a filling station soon The gear indicator Gear not trained ( flashes.
Page 68
Indicator and warning Display text Meaning lights Service over- Service-due date has passed ( due! https://www.motorcycle-manual.com/...
Page 69
Ambient temperature Outside temperature Radio-operated key out of warning range The outside temperature is dis- played in the status line of the Ice crystal symbol is dis- with Keyless Ride TFT display. played. General warning light shows When the motorcycle is at a Possible cause: yellow.
Page 70
R/C erated key replaced by an au- key can remain operational. The fuse for the alternator reg- thorised BMW Motorrad Re- Replace the battery of the ulator can blow if the 12 V bat- tailer.
Page 71
Have the fault rectified as battery condition. faulty! quickly as possible by a specialist workshop, preferably Tail light faulty! WARNING an authorised BMW Motorrad Retailer. Failure of the vehicle sys- Brake light faulty! tems Bulb faulty Risk of accident General warning light shows Do not continue your journey.
Page 72
Replacing the additional head- Vehicle overlooked in traffic workshop, preferably an author- light ( 214). due to failure of the lights on ised BMW Motorrad Retailer. the vehicle Anti-theft alarm battery Safety risk Anti-theft alarm battery weak Replace defective bulbs as...
Page 73
Seek the advice of a specialist Topping up coolant ( 199). workshop, preferably an author- The engine control unit has dia- ised BMW Motorrad Retailer. gnosed a fault which affects the Possible cause: pollutant emissions. The coolant temperature is too...
Page 74
If possible, have the vehicle control. Riding at specialist workshop, preferably picked up and have the fault mod. speed pos. Ride care- an authorised BMW Motorrad rectified by a specialist work- fully to next specialist Retailer. shop, preferably an authorised workshop.
Page 75
BMW Motorrad on temperature compensation Tyre pressure is not Retailer. and pressure adaptation in the at setpoint. Stop section entitled "Engineering It is possible to continue to ride immediately! Check tyre details": but not recommended. pressure. Temperature compensation Tyre press.
Page 76
Have the fault rectified by a (RDC) Find the correct tyre pressures specialist workshop, preferably in the following places: "---" an authorised BMW Motorrad On the back cover of the Retailer. rider's manual Possible cause: Instrument cluster in the TYRE...
Page 77
Have the fault rectified by a ing function will be available for a specialist workshop, preferably specialist workshop, preferably limit time only. an authorised BMW Motorrad an authorised BMW Motorrad Seek the advice of a specialist Retailer. Retailer. workshop, preferably an author-...
Page 78
Intell. emerg. call Seek the advice of a specialist failure. Have it workshop, preferably an author- ABS deactivated. checked by a specialist ised BMW Motorrad Retailer. workshop. Possible cause: ABS self-diagnosis not Possible cause: The rider has switched off the...
Page 79
Have the fault rectified as that can lead to an ABS Pro specialist workshop, preferably quickly as possible by a fault message ( 177). an authorised BMW Motorrad specialist workshop, preferably Retailer. an authorised BMW Motorrad Have the fault rectified as Retailer.
Page 80
Seek the advice of a specialist speed pos. Ride carefully been dealt with. workshop, preferably an author- to next specialist work- ised BMW Motorrad dealer. ASC/DTC self-diagnosis shop. not completed ASC/DTC switched off Possible cause:...
Page 81
Do not damage the angular carefully to next special- specialist workshop, preferably rate sensor. ist workshop. an authorised BMW Motorrad Bear in mind that the ASC/ Retailer. Possible cause: DTC function is not available The DESA control unit has de-...
Page 82
Pro rectified by a specialist work- to a filling station soon. The gear indicator flashes. shop, preferably an authorised The Pro shift assistant is BMW Motorrad Retailer. not available. WARNING Hazard warning lights Possible cause: Irregular engine operation or...
Page 83
Have your motorcycle serviced ing distance in the MY VEHICLE shop, preferably by an author- regularly by a specialist work- and SERVICE REQUIREMENTS ised BMW Motorrad Retailer. shop, preferably by an author- menu screens. ised BMW Motorrad Retailer. The operational and road...
159) Consult a specialist workshop, ASC self-diagnosis is in pro- preferably an authorised gress. ( 160) BMW Motorrad dealer. with riding modes Pro Lock the handlebars DTC self-diagnosis is in pro- Turn the handlebars all the way gress. ( 161) to left.
Welcome lights Electrically powered accessor- You receive one radio-operated ies remain operational for a lim- key and one emergency key. If a Switch on the ignition. ited period of time. key is lost or mislaid, consult the The side lights briefly light up. notes on the electronic immobil- The battery can be recharged with daytime riding light...
Page 88
Ignition, lights and all function with daytime riding light Range of the Keyless circuits switched off. Daytime riding light is switched Ride radio-operated key To unlock the steering lock, briefly press button 1. with LED additional with Keyless Ride headlight approx.
Page 89
Switching off ignition Press and hold down button 1. If the battery of the radio-oper- ated key is flat, the motorcycle Light is switched off. Requirement can be started by inserting the The steering lock engages. Radio-operated key is within folded radio-operated key into range.
Page 90
Start the engine ( 158). Use a battery compliant with the manufacturer's specifica- Replace the battery of the tions. radio-operated key When inserting the battery, Requirement always make sure polarity is correct. The radio-operated key does not react because the battery Insert the new battery with the is weak.
Emergency off switch (kill A spare ignition key attached to switch) ised BMW Motorrad dealer. The the same ring as the ignition key/ ignition keys are part of an in- radio-operated key used to start...
A changeover of the language for Even if an emergency call using the emergency call can only be BMW is not possible, the system performed by the BMW Motorrad may make an emergency call to partner. The language assigned a public emergency call number.
Page 93
During that time, it is possible to cancel the emer- gency call. Operate the emergency-off switch to stop the engine. Remove helmet. After expiry of the timer, a voice contact to the BMW Call Center is established. with Connectivity The connection was established. https://www.motorcycle-manual.com/...
Page 94
If possible, remove helmet and stop engine. A voice contact connection to the BMW Call Center is estab- lished. Provide information to the emergency services using the microphone 3 and speaker 4. Automatic emergency call...
Provide information to the The low-beam headlight switches emergency services using the on automatically under the fol- microphone 3 and speaker 4. lowing conditions: When the engine is started. Emergency call in the When the vehicle is pushed event of a severe fall with the ignition switched on.
Push switch 1 forward to Immediately after switching off Immediately after switching off switch on the high-beam the ignition, pull switch 1 back the ignition, push button 1 to headlight. and hold it in that position until the left and hold it in that po- the headlight courtesy delay sition until the parking lights Pull switch 1 back to operate...
Page 97
Manual daytime riding daytime riding light and switch with Connectivity on the low-beam headlight and light In the Settings, Vehicle front side light. settings, Lights menu, Requirement switch off the Auto. dayt. Automatic daytime riding light is NOTICE rid. light function. switched off.
Automatic daytime riding switch on the Auto. dayt. on (e. g. when you ride into rid. light function. a tunnel, and the response of light the automatic daytime riding The indicator light for the light to the change in ambient automatic daytime riding WARNING brightness is delayed).
Comfort turn indicator ignition if necessary and press NOTICE button 1 again. The indicator function replaces Turn indicators the hazard warning lights func- tion while the indicator button is Operating the turn pressed once operating readi- indicators ness is switched on. The hazard Switch on the ignition.
to select the display in the bot- dicators only switch off automat- Trip distance 1 TRIP 1 ically once the speed-dependent tom line 4. Trip distance 2 TRIP 2 distance covered is reached. The following values can be dis- Automatic trip distance played: TRIP A, is automatically reset Multifunction display...
The trip recorder desired is displayed. Press the bottom part 2 of Press and hold the bottom the MENU rocker button until part 2 of the MENU rocker the average value 4 displayed button until the riding time Press and hold the top part 1 has been reset.
Page 102
pressure warning can only be leave the automatic function switched off DWA OFF. switched off in off-road mode. Set the time CLOCK. Adjust the units UNIT. with preparation for navigation Reset displays RESET. system Exit SETUP EXIT. Show time from Global Po- Quitting SETUP sitioning System GPS ON or Requirement...
Date and time button repeatedly until SETUP Press the bottom part of the EXIT appears on the display. MENU rocker button briefly to Setting the clock go back an hour. Press and hold the bottom Requirement part 2 of the MENU rocker Press and hold the bottom The vehicle is at a standstill.
Setting the date Press the bottom part of the Press the bottom part of the MENU rocker button briefly to MENU rocker button and hold Requirement go back one day. once the desired year has been The vehicle is at a standstill. set.
Page 105
Briefly press the top Change clock display between part 1 of the MENU rocker 24H and 12H button repeatedly until Change date format between SETUP UNIT ENTER appears DMY and MDY on the display. Press and hold the bottom part 2 of the MENU rocker button to activate SETUP UNIT.
peatedly until SETUP RESET Press and hold the bottom Units have been reset to the part 2 of the MENU rocker factory setting. appears on the display. button to quit SETUP UNIT. SETUP UNIT EXIT is Press and hold the bottom part 2 of the MENU rocker SETUP RESET appears on the displayed.
Page 107
The ASC/DTC indicator and The ABS function is switched NOTICE warning light first changes off. its status. Press and hold You have the option of deactiv- Activating the ABS down button 1 until the ating the ABS function while the function ABS indicator and warning motorcycle is on the move.
ABS indicator and warn- An ABS fault has oc- ing light goes out; if self- curred if the ABS indic- diagnosis has not completed, it ator and warning light shows starts flashing. when the motorcycle accel- erates to a speed in excess with Connectivity of the minimum stated below Possible ABS system status ON...
Page 109
Switch on the ASC/DTC Release button 1 after the with Connectivity ASC/DTC system status function Possible ASC/DTC system changes. status ON is displayed. ASC/DTC indicator and Release button 1 once the warning light remains on. status has changed. ASC/DTC indicator and with Connectivity warning light remains off The new ASC/DTC system...
Possible settings If the ASC/DTC indicator Dynamic ESA (electronic chassis and warning light and suspension adjustment) en- remains on even though the ables you to adjust rear-wheel vehicle has accelerated past damping to the road surface. the minimum speed stated Three damper settings and three below after the ignition was spring preload levels are avail-...
Page 111
ing 2 and spring preload 3 ap- NOTICE pear on the display. You can adjust the damping The setting shows briefly, then characteristic while the motor- disappears automatically. cycle is on the move. Adjusting the chassis and The following settings are avail- suspension able: ROAD: Damping for comfortable...
Page 112
ENDURO riding mode and not NOTICE adjustable in this riding mode. You cannot adjust spring preload with Connectivity while the motorcycle is on the A message is issued if a set- move. ting is not possible in the se- The following settings are avail- lected riding mode.
ASC/DTC control is Riding mode provided for each of these scen- Using the riding modes arios. BMW Motorrad has developed Press button 1. NOTICE operational scenarios for your motorcycle from which you can See the section entitled "Engin- select the scenario suitable for eering details"...
Page 114
is displayed. The guide 4 dis- Press button 1 repeatedly until plays how many riding modes are the required riding mode is in- available. dicated beneath the selection arrow. The following ride modes can be selected: RAIN: For riding on a rain-wet road surface.
Display when adjusting Display when adjusting tivated after approximately two seconds. settings (Speed Limit Info settings (Speed Limit Info The newly selected riding not active) active) mode is activated as you ride only when the following preconditions are satisfied: Throttle grip is in idle position. Brake is not applied.
Page 116
Push button 1 forward and Adjustment range of the hold it in this position. cruise control The motorcycle accelerates smoothly. 30...190 km/h The current speed is main- Indicator light for cruise tained and saved if button 1 is control lights up. not pushed again.
Resuming former cruising The motorcycle decelerates Indicator light for cruise smoothly. control lights up. speed The current speed is main- Switching off cruise tained and saved if button 1 is control not pushed again. Switching off cruise control Operate the brakes, clutch or throttle grip (throttle back to beyond the basic setting), to switch cruise control off.
Switching minimum only when the engine is appears in front of the heated running. grip symbol 3. pressure warning on or off The handlebar grips can be The minimum pressure of the heated to three levels. Stage NOTICE tyres can be chosen freely. three is for heating the grips Once the minimum pressure The increase in power consump-...
with Connectivity 20% heating power The selected heating stage will be saved if you allow a certain length of time to pass without making further changes. In order to switch off the heated grips, press button 1 Turn the seat lock 1 to the repeatedly until the heated grip right with the ignition key.
Operating instructions Remove seat bench in direction of arrow 5 and place on spacer Stowing the rider's buffers on a clean surface. manual Installing seat Stow the rider's manual(s) in the pocket supplied. Slide seat bench 2 in direction of arrow 4 into holds 3. Fold the opening end of the Press seat bench firmly in dir- pocket multiple times as tightly...
On some mobile devices, e.g. TFT display, the Bluetooth devices while driving results in a those with iOS operating sys- connection may be restricted. risk of accident tems, the BMW Motorrad Con- https://www.motorcycle-manual.com/ BMW Motorrad recommends...
Up-to-date information is avail- Activate the function in accord- able at: ance with the operation feed- back. bmw-motorrad.com Activate the function to the left All contents of the display are or back. operated using the multi-con- troller 1 and the MENU 2 rocker Go back to the View menu button.
Page 124
Press and hold the top part Operating instructions in Confirm selection. of the MENU rocker button: Confirm settings. the main menu Advance a menu step. In the View menu: call up Scroll to the right in lists. Pure Ride view. In the My Vehicle menu: ad- In Pure Ride view: change op- vance one menu screen.
Page 125
Operating instructions in pending on whether you can return to a higher level. submenus Operating instruction 2: An In addition to the operating in- additional submenu level can structions in the main menu, be called up. there are additional operating in- Operating instruction 3: There structions in the submenus.
Page 126
Switching functions on Symbol 3 shows that the func- Repeatedly press the multi- tion can be switched off. controller 1 briefly to the right and off until the desired menu item is Symbol 4 shows that the func- highlighted. tion can be switched on. Briefly push button 2 down.
Page 127
down until the desired entry is The last menu used is called the left in the top status line. highlighted. up. The last entry highlighted Operator actions affect the is selected. currently active device until the To move the cursor up in lists, turn the multi-controller 1 up operating focus is changed Change of operating focus...
Page 128
System status 2: ABS function Riding time 1 is switched off. Riding time 2 Changing display for driver info. status line Requirement Break 1 The vehicle is at a standstill. The Pure Ride view is displayed. Break 2 Switch on the ignition ( 84).
Info on or off Adjust settings Requirement Vehicle is connected with a com- patible mobile end device. The BMW Motorrad Connected app is installed on the mobile end Scale device. Lower engine speed range Speed Limit Info displays...
Range General settings The range is shown together with a warning once the fuel Adjust the volume reserve has been reached. Connect rider's and passen- After a refuelling stop, range is ger's helmet ( 131). recalculated if the amount of Increase volume: turn the fuel in the tank is greater than multi-controller upwards.
Page 131
Setting the clock the time from the Navigator is Spanish applied. French Switch on the ignition ( 84). Special functions ( 238) Italian Call up the Settings, Sys- Dutch tem settings, Date and Setting units of Portuguese time, Set time menu. measurement Russian Adjust Hour and Minute.
On some mobile devices, e.g. Bluetooth not possible to ensure fault- those with iOS operating sys- free communications in every Short-range wireless tems, the BMW Motorrad Con- situation. technology nected App must be opened be- fore use. The Bluetooth function might not Possible sources of be available in certain countries.
Page 133
mobile phones and navigation (see mobile end device's troubleshooting chart in the systems). operating instructions). section entitled "Technical data". ( 246) Select Mobile device and Please consult the operating in- confirm. Depending on the mobile end structions for your communica- device, telephone data is trans- Select PAIRING NEW MOB.
Page 134
Deleting connections Make the helmet's communica- tion system visible. Call up the Settings, Con- Select PAIRING NEW HEL- nections menu. METS or PAIRING NEW PASS. Select Delete connections. HELM. and confirm. To delete an individual connec- Helmets are searched for. tion, select the connection and confirm.
My vehicle Start screen Check Control display Mode of presentation Coolant temperature Range ( 128) Total distance covered Service-due indicator Tyre pressure, rear 200) On-board voltage ( 216) Tyre pressure, front 200) https://www.motorcycle-manual.com/...
Operating instructions Scrolling through menu with tyre pressure control (RDC) screens TYRE PRESSURE SERVICE REQUIREMENTS For more information on tyre pressure and Check Control messages, see the "Displays" section. NOTICE Check control messages are at- Operating instruction 1: tabs tached dynamically to the My which show how far to the left Call up the My vehicle menu.
Page 137
Service requirements If the time remaining to the next service is less than a month or if the next service is due within 1000 km, a white CC message is displayed. https://www.motorcycle-manual.com/...
Navigation On-board computer Calling up trip computer Call up the on-board computer Warnings Calling up on-board 136). computer Scroll to the right until the WARNING Call up the My vehicle menu. TRIP COMPUT. menu screen Scroll to the right until the Using a smartphone during is displayed.
Page 139
On some mobile devices, e.g. Call up the Navigation, Re- loss of control those with iOS operating sys- cent destinations menu. tems, the BMW Motorrad Con- Operating the integrated inform- Select and confirm destination. nected App must be opened be- ation system and communication Select Start route guid- fore use.
purpose, Spoken instruc- Entering special Setting route criteria tions must be switched on. destinations Call up the Navigation, Call up the Navigation, Route criteria menu. Special destinations, such as Active route guidance The following criteria can be se- points of interest, can be dis- menu.
Call up the Media menu. functions may be restricted. NOTICE The following functions can be used in the context menu: BMW Motorrad recommends Start playback or Pause setting the volume on the mobile playback. end device for media and calls to Select the Now playing, All maximum before setting off.
End the call: tilt Multi-Control- Call list: list of calls with the ler 1 to the left. mobile end device Favourites: list of favourites Muting saved on the mobile end device During active phone calls, the Display software microphone in the helmet can be muted.
Overview Protecting the vehicle Confirmation tone sounds battery twice (if programmed). with anti-theft alarm (DWA) Anti-theft alarm is active. A DWA that has been enabled switches off automatically after a General information about Activation with Keyless few days to protect the vehicle the anti-theft alarm (DWA) Ride battery and to maintain starting...
Page 145
Motion sensor when peatedly until SETUP DWA ap- pears on the display. motorcycle is to be transported If you want to transport your motorcycle by train or on a trailer, for example, it is advisable to switch off the motion sensor.
Alarm triggers Press and hold the top part 1 with Keyless Ride of the MENU rocker button to A DWA alarm can be triggered quit SETUP. SETUP ENTER appears on the Motion sensor. display. An attempt to use an unauthor- ised vehicle key to switch on with Connectivity the ignition.
Flashes 1x: Motion sensor 1 ted to your particular needs in Flashes 2x: Motion sensor 2 the following respects by your Flashes 3x: Ignition switched authorised BMW Motorrad Re- on with unauthorised vehicle tailer: Confirmation alarm tone after Flashes 4x: Disconnection of...
Page 148
Default settings The anti-theft alarm ships with the following default settings: Confirmation alarm tone after having activated/deactivated the DWA: no. Alarm tone: intermittent. https://www.motorcycle-manual.com/...
Turn the mirror to the correct nection on the mirror arm. an authorised BMW Motorrad position. Loosen nut 2. Retailer. Turn the mirror arm to the ap- Headlight beam throw and propriate position.
Clutch the setting checked by a special- ist workshop, preferably an au- Adjusting the clutch lever thorised BMW Motorrad dealer. WARNING Turn adjusting screw 1 Adjusting headlight beam clockwise to increase the span Adjusting the clutch lever...
Brakes Spring preload Adjusting brake lever Adjustment It is essential to set spring pre- WARNING load of the rear suspension to suit the load carried by the mo- Relocated brake fluid tank torcycle. Increase spring pre- Air in the brake system load when the vehicle is heavily Do not turn the handlebars or loaded and reduce spring preload...
Damping Basic setting of spring preload, rear Adjustment Damping must be adapted to suit without Dynamic ESA the condition of the surface on Turn the adjuster knob which the motorcycle is ridden counter-clockwise as far as and to suit spring preload. it will go.
Turn the adjusting screw 1 an- ticlockwise to soften the damp- ing action. Basic setting of rear- suspension damping characteristic without Dynamic ESA Turn the adjusting screw as Adjust the damping action by far as it will go clockwise, then turning adjusting screw 1.
Your authorised anced loads Carefully try out the limits of BMW Motorrad Retailer will be the motorcycle's bank angle Risk of falling glad to advise you on the correct and adapt your style of riding Do not exceed the permissible clothing for every purpose.
Page 157
Speed Make sure that the weight is Payload of topcase uniformly distributed between If you ride at high speed, always right and left. bear in mind that various bound- Pack heavy items at the bot- max 5 kg ary conditions can adversely af- tom of the cases and toward fect the handling of your motor- the inboard side.
Maximum speed with Risk of poisoning Catalytic converter knobbly tyres or winter Exhaust fumes contain carbon If misfiring causes unburned fuel tyres monoxide, which is colourless to enter the catalytic converter, and odourless but highly toxic. there is a danger of overheating DANGER and damage.
Risk of overheating Always before riding Do not tamper with the vehicle in any way that could result in off: ATTENTION tuned performance. Check operation of the brake Engine running for prolonged Comply with checklist system. period with vehicle at stand- Check operation of the lights At regular intervals, use the still...
Check the brake-fluid level, ABS self-diagnosis is in pro- front brakes ( 194). gress. ( 159) Checking the brake-fluid level, ASC self-diagnosis is in pro- rear brakes ( 195). gress. ( 160) Check coolant level ( 198). with riding modes Pro Lubricate the chain ( 222).
Page 161
The ABS indicator light quickly as possible by a before it completes. flashes. specialist workshop, preferably Phase 1 an authorised BMW Motorrad ABS self-diagnosis Retailer. All indicator and warning lights completed are switched on. The ABS indicator and warning...
Page 162
ASC self-diagnosis Check all the indicator and ABS self-diagnosis not warning lights. BMW Motorrad ASC performs completed self-diagnosis to ensure its op- ASC self-diagnosis not The ABS function is not avail- erability. Self-diagnosis is per- completed able, because self-diagnosis formed automatically when you switch on the ignition.
Have the fault rectified as completed quickly as possible by a with riding modes Pro specialist workshop, preferably The DTC symbol no longer BMW Motorrad DTC performs an authorised BMW Motorrad shows. self-diagnosis to ensure its op- Retailer. Check all the indicator and erability.
Shift assistant Pro Apply the brakes in good Running-in speed time. NOTICE Tyres No full load (Odometer reading Whenever the Pro shift assist- New tyres have a smooth sur- 0...1200 km) ant shifts gears, cruise control face. This must be roughened by Note the mileage after which is automatically disengaged for riding in a restrained manner at...
See the section "Engineering cause a severe load-change details" for more information on Brakes reaction. the Pro shift assistant: BMW Motorrad recommends with riding modes Pro WARNING disengaging the clutch for Shift assistant Pro ( 184) Driving on unpaved or dirt shifts in these circumstances.
Brakes Rims ATTENTION BMW Motorrad recommends How can stopping checking the rims for damage Riding on unsurfaced or dirty distance be minimised? after off-roading. roads Each time the brakes are applied, Increased brake pad wear a load distribution shift takes...
Page 167
WARNING Use both front and rear brakes, and make use of the engine's BMW Motorrad ABS prevents Wetness and dirt result in braking effect as well. the front wheel from locking up. diminished braking efficiency...
Parking your ABS Pro torcycling. It is still possible for these limits to be overshot due motorcycle with riding modes Pro to misjudgement or rider error. In Side stand Physical limits applicable to extreme cases this can result in a motorcycling crash.
Extend the side stand and prop Do not attempt to run the ATTENTION the motorcycle on the stand. vehicle on leaded fuel or fuel with metallic additives (e.g. If the camber of the roadway Centre stand folds in due to manganese or iron).
Page 170
Refuelling Make sure the ground is level Clean plastic surfaces immedi- and firm and place the motor- ately after contact with fuel. WARNING cycle on its side stand. Make sure the ground is level with centre stand and firm and place the motor- Fuel is highly flammable cycle on its centre stand.
Page 171
run dry and the engine had cut Do not smoke. Never bring out due to a lack of fuel. a naked flame near the fuel tank. Fuel tank capacity WARNING approx. 15 l Escape of fuel due to heat- induced expansion if fuel Reserve fuel tank is overfilled Risk of falling...
Page 172
Do not smoke. Never bring NOTICE NOTICE a naked flame near the fuel tank. The fuel filler cap can be opened The fuel filler cap can be opened within the defined waiting time within the defined waiting time WARNING after the ignition has been after the ignition has been switched off, without the radio- switched off, without the radio-...
Page 173
while the search for the radio- detected and the fuel reserve in- operated key is in progress. dicator light is switched off. Slowly pull tab 1 on the fuel filler cap up again. NOTICE Fuel filler cap unlocks. The "usable fuel capacity" spe- Fully open the fuel filler cap.
The fuel filler cap locks auto- matically when the waiting time expires. The engaged fuel filler cap locks immediately when you secure the steering lock or switch on the ignition. Securing motorcycle for transportation ATTENTION ATTENTION Make sure that all components that might come into contact Vehicle topples to side when Trapping of components...
Page 175
Secure the straps behind on both sides on the rear frame and tighten. Tighten all the straps uniformly; the vehicle's suspension should be compressed as tightly as possible front and rear. https://www.motorcycle-manual.com/...
If the rider increases braking tact with the road. At this instant, pressure to the extent that brak- BMW Motorrad ABS must act on ing force exceeds the maximum the assumption of an extremely transferable limit, the wheels start low coefficient of friction (gravel, https://www.motorcycle-manual.com/...
Page 179
Within the limits imposed by If a fault message is issued on the ABS function is deactivated physics, the BMW Motorrad ABS account of exceptional riding for safety reasons and an ABS ensures directional stability on conditions, you can reactivate fault message is issued.
Page 180
What is the role of regular riding which even BMW Motorrad ABS intervention ABS cannot evade. servicing? Technically speaking, depending on the riding situation ABS Pro Evolution of ABS to WARNING adapts ABS intervention to the ABS Pro motorcycle's bank angle. Signals...
The BMW Motorrad ASC/ available at the rear wheel. If slip DTC can be deactivated in these Traction control (ASC/ exceeds a certain limit, the en- cases.
Page 182
Minimum speed for ac- sued. driving condition again as soon tivation of DTC The BMW Motorrad Traction as possible. Control can shut down automat- min 5 km/h When riding on a slippery sur- ically under the exceptional riding conditions outlined below.
The adjustment of the Dynamic a corresponding loss of stability. detection is reduced to achieve ESA also depends on the riding The BMW Motorrad DTC is un- an enhanced braking effect. mode selected. able to control a situation of this...
Page 184
is set up to achieve maximised Driving stability Mode changes braking effect. In RAIN riding mode, DTC in- The riding mode can be changed tervenes early to maximise rid- while the vehicle is stationary without riding modes Pro ing stability. with the ignition on.
Tyre pressure control Temperature measured-value signals for some time after the vehicle comes to a compensation (RDC) stop. Tyre pressure is a temperature- with tyre pressure control sensitive variable: pressure in- Transmission duration (RDC) creases as tyre-air temperature of the measured values rises and decreases as tyre-air Function after vehicle standstill:...
ues displayed there usually do the throttle in virtually all load and Example not correspond to the values dis- rpm ranges. played in the display. Advantages 0.2 bar Pressure adaptation 70-80 % of all gearshifts on a The tester on the filling station Compare the RDC value on the trip can be done without using shows:...
Page 187
spring through a certain "over- Downshifting travel" at ordinary speed or rap- Downshifting is assisted until idly and keep the shift lever in maximum rpm for the target this position until the gearshift is gear to be selected is reached. completed.
( 213). ledge of the technology involved. Removing battery If you are in doubt, consult a 218). specialist workshop, preferably Adjusting the damping your authorised BMW Motorrad characteristic for rear Retailer. https://www.motorcycle-manual.com/ wheel ( 151).
(83 30 0 402 242). Installing the front-wheel with service toolkit stand ATTENTION Use of the BMW Motorrad front-wheel stand without also using the auxiliary stand Risk of damage to parts if vehicle topples Place the motorcycle on an BMW Motorrad has put together Loosen the mounting bolts 1.
Make sure the motorcycle is standing firmly. Engine oil Checking engine oil level ATTENTION Misinterpretation of oil level reading, because oil level is Align the two adapters 2 so Apply uniform pressure to push temperature-dependent (the that the front suspension is the front-wheel stand down higher the temperature, the securely seated.
Page 193
Make sure the engine is at op- Seat the oil dipstick on the oil erating temperature and hold filler neck, but do not engage the motorcycle upright. the threads. with centre stand Remove the oil dipstick and check the oil level. ATTENTION Vehicle topples to side when being lifted on to stand...
Checking function of brakes Product recommended by Operate brake lever. BMW Motorrad: ADVANTEC The pressure point must be Ultimate oil, SAE 5W-40, clearly perceptible. API SL / JASO MA2 Press the footbrake lever. max 0.5 l (Difference between...
Page 195
BMW Motorrad Diminished braking effect, dam- dealer. age to the brakes In order to ensure the depend- Checking front brake pad ability of the brake system, do thickness not permit the brake pads to wear past the minimum per- Place the motorcycle on its missible thickness.
Page 196
Have the brake pads replaced used. by a specialist workshop, preferably an authorised with centre stand BMW Motorrad Retailer. Make sure the ground is level Visually inspect the brake pads and firm and place the motor- Checking brake-fluid to ascertain their thickness.
Page 197
(Brake-fluid reservoir voir to sink. horizontal, motorcycle upright) If the brake fluid level drops be- low the permitted level: Have the fault rectified as quickly as possible by a specialist workshop, preferably an authorised BMW Motorrad dealer. https://www.motorcycle-manual.com/...
Page 198
Check the brake-fluid level at cialist workshop, preferably an regular intervals. authorised BMW Motorrad Re- Always make sure that the tailer. lid of the brake fluid reservoir https://www.motorcycle-manual.com/...
Have the clutch checked by a specialist workshop, preferably Repeatedly pull clutch lever 1 Loosen lock nut 1. an authorised BMW Motorrad tight against the grip. To increase clutch play, screw Retailer. adjusting screw 2 into the...
it only be possible to set the correct clutch play by unscrewing further. Checking the clutch play 197). Tighten lock nut 1 while hold- ing adjusting screw 2. Coolant Check the coolant level in ex- Check coolant level Coolant, specified level pansion tank 1.
Page 201
Topping up coolant Open cap 1 of the expansion Insert radiator cowl 1 into the tank. brackets 2. Undo screws for the radiator Top up coolant to specified The radiator cowl engages with cowl 1 from the inside. level using a suitable funnel. an audible click.
Checking tyre pressure and replaced if necessary, Tyre pressure, front preferably by an authorised WARNING BMW Motorrad Retailer. Incorrect tyre pressure 2.2 bar (One-up, tyre cold) Checking tyre tread depth Impaired handling characteristics 2.5 bar (Two-up and/or with...
The BMW Motorrad Retailer or online be changed. locations of the marks are indic- If you decide that you would like ated on the edge of the tyre, e.g.
Page 204
Mask off the parts of the wheel the front wheel can turn freely. rim that could be scratched in BMW Motorrad recommends the process of removing the the BMW Motorrad front-wheel brake calipers. stand for lifting the motorcycle. Installing the front-wheel stand ATTENTION 189).
Page 205
Remove the axle screw 2. With the wheel suitably suppor- Remove spacer bush 5 from ted, remove axle 4. the left-hand side of the wheel Loosen the left axle clamping hub. screws 3. Do not remove the grease from the axle. Installing front wheel Roll the front wheel forward to remove.
Page 206
BMW Motorrad between the brake pads of the dealer. brake caliper on the left. Install axle screw 2 and tighten to the specified torque.
Page 207
Tighten left-hand axle clamp- ing screws 3 to the specified torque. Tighten right-hand axle clamp- Clamp of quick-release ing screws 1 to torque. axle Tightening sequence: Tighten screws six times in alternate Clamp of quick-release sequence axle 19 Nm Tightening sequence: Tighten Remove the front-wheel stand.
Page 208
Before driving, check that the Wheel-speed sensor, brakes respond without delay. front, to fork leg Operate the brake several Thread-locking compound: times until the brake pads are micro-encapsulated bedded. Seat the cable for the wheel- 8 Nm speed sensor in holding clips 2 and 3.
Page 209
Press the brake caliper 1 Remove axle nut 4 and Remove quick-release axle 7 against the brake disc 2. washer 5. and remove chain tensioner 8. Brake pistons are pushed back. Remove chain tensioner 6 and push the axle in as far as pos- sible.
Roll the rear wheel as far specialist workshop, preferably Installing the rear wheel forward as possible and an authorised BMW Motorrad dealer. loop chain 7 over the chain WARNING sprocket. Roll the rear wheel into the...
quick-release axle 5 in the Risk of accident due to delayed brake caliper and rear wheel. braking effect. Make sure that the axle fits into Before driving, check that the the recess of the chain ten- brakes respond without delay. sioner.
Page 212
Unclip hose 1 from retaining Remove frame 4. Make sure that air filter 5 is lugs 2. correctly seated on lugs 6 on Remove air filter 5. frame 4. Installing air filter To unlock, press and hold down button 3 (arrow 1). Install the frame 4.
Consult a specialist workshop, LED flashing turn indicators preferably an authorised can only be replaced as a com- BMW Motorrad dealer. plete unit. Consult a specialist workshop, preferably an author- ised BMW Motorrad Retailer. https://www.motorcycle-manual.com/...
Page 214
Replace the defective bulb. Bulbs for flashing turn indicators, front RY10W / 12 V / 10 W with LED flashing turn indic- ator Use a clean, dry cloth to hold Pull the glass out of the re- Working from the inboard side, the new bulb in order to keep flector housing at the threaded- insert the glass into the light...
Page 215
Replacing the licence plate bulb Place the motorcycle on its stand on firm, even ground. Switch off the ignition. Pull the bulb out of the bulb Insert the bulb into the socket. socket. Replace the defective bulb. Light source for the number plate light Withdraw bulb socket 1 from W5W / 12 V / 5 W...
An additional headlight can only be replaced as a complete unit. Consult a specialist work- shop, preferably an authorised BMW Motorrad Retailer. Remove screws 1 on left and right. Ensure that the six mounting Body panels Remove screws 2.
gine by connecting leads to the from the on-board electrical on-board socket. system. ATTENTION Contact between crocodile clips of jump leads and vehicle Risk of short-circuit Use jump leads fitted with fully Install screws 2. insulated crocodile clips at both Install screws 1.
Compliance with the points be- battery. low is important in order to max- Allow both engines to idle for a BMW Motorrad has developed a imise battery life: few minutes before disconnect- float charger specially designed Keep the surface of the battery ing the jump leads.
Page 219
Damage to charger and vehicle the motorcycle's on-board sys- electronics electrical system. tems. You can obtain additional Use suitable BMW chargers. NOTICE information from your authorised The suitable charger is BMW Motorrad dealer. available from your authorised The motorcycle's on-board elec- BMW Motorrad dealer.
Page 220
Charging a disconnected with anti-theft alarm (DWA) First disconnect negative bat- tery cable 3. battery If applicable, switch off the anti- Press in the lock and flip open theft alarm. Charge the battery using a positive terminal cover 1. suitable charger. Switch off the ignition.
Switch off the ignition. Risk of short-circuit with anti-theft alarm (DWA) Insert the battery into the bat- Always proceed in compli- If applicable, switch on the anti- tery compartment, with the ance with specified installation theft alarm. positive terminal on the right sequence.
Never attempt to jumper a by a specialist workshop, blown fuse. preferably an authorised Always replace a defective fuse BMW Motorrad dealer. with a new fuse of the same amperage. Main fuse Replace defective fuse 1 or 2 depending on assignment.
Fuse box nector loosened by a specialist and information system can be workshop or other authorised connected to the diagnostic persons during your next BMW connector 2. 10 A (Slot 1: instrument Service appointment. cluster, alarm system (DWA), Securing the diagnostic...
Chain obtainable from your authorised Chain deflection BMW Motorrad dealer. Lubricating chain Wipe off excess lubricant. 30...40 mm (Motorcycle with ATTENTION Checking chain sag no weight applied, supported Inadequate cleaning and lub- on its side stand) Place the motorcycle on its rication of the drive chain stand on firm, even ground.
Rear quick-release axle in swinging arm Thread-locking compound: mechanical 100 Nm Loosen the axle nut 1. Make sure the ground is level and firm and place the motor- Use the adjusting screws 3 on cycle on its stand. left and right to adjust chain sag.
Page 226
Consult a specialist workshop, max 144 mm (measured preferably an authorised centre to centre over 10 BMW Motorrad dealer. rivets, chain pulled taut) If the chain has stretched to the maximum permissible length: Consult a specialist workshop, preferably an authorised BMW Motorrad dealer.
Operating electrical Make sure that cables do not accessories impede the rider. Make sure that cables do not You can start using electrical restrict the steering angle or accessories connected to the obstruct handling. motorcycle's sockets only when Make sure that cables cannot the ignition is switched on.
Page 230
Closing cases direction of travel when you close the carry handle. with case Fold down carry handle 1. Turn the lock with the key until Turn key 2 anti-clockwise and it is at right angles to the for- withdraw. ward direction of travel. Close the case lid.
Page 231
Pull red release lever 1 up. Pull red release lever 1 up. Push locking flap 1 down until you feel some resistance. Latching flap 2 pops up. Latching flap 2 pops up. Then push locking flap and red Fully open the latching flap. Fully open the latching flap.
Contact your authorised BMW Motorrad dealer if you cannot find your combination of vehicle and cases on the sign. ATTENTION The values for the combination...
Page 233
Push yellow button 1 forwards, Engage lever 1 in the forwards ATTENTION simultaneously opening the end position to obtain the lar- topcase lid. ger volume. Closure of carrying handle Engage lever 1 in the rear- with case lock latched Adjusting the topcase wards end position to obtain Damage to locking tab volume...
Page 234
Removing the topcase with topcase Pull red lever 1 to the rear. Pull red lever 1 to the rear. Latching flap 2 pops up. Latching flap 2 pops up. Fully open the latching flap. Fully open the latching flap. Turn key 1 clockwise. Take a firm grip of the handle Press and hold down yellow and lift the topcase out of the...
Page 235
Contact your authorised BMW Motorrad dealer if you cannot find your combination of ATTENTION vehicle and topcase on the sign. The values for the combination...
NOTICE Navigation preparation is suit- Turn ignition key 1 anti-clock- Insert the navigation device 1 able from BMW Motorrad Navig- wise. at the bottom and swing it to- ator IV. wards the rear in one rotational Pull the lock retainer 2 to the movement.
Page 237
The description below is based downwards and remove. on the BMW Motorrad Navig- Dust and dirt on the ator V and the BMW Motorrad Mount Cradle contacts Navigator VI. The BMW Motorrad Damaged contacts Navigator IV does not support all Always reinstall the cover as the options described here.
Page 238
In the BMW special menu: select Long-push to the right to rider removing a hand from the menu item. activate this function. handlebars. Short-tilting Multi- Long-push to the left to Controller 1 to the left and activate this function.
Page 239
(not shown unless NOTICE preceding track. a route is active). Long-push to the right: Play Skip: Skips the next waypoint If a BMW Motorrad commu- next track. (not shown unless the route nication system is connected, Turning increases or has waypoints).
Page 240
Date and time menu. security prompt asking for the Special functions PIN to be entered is issued. Integration of the BMW Motorrad Security settings Navigator has produced a num- Screen brightness The BMW Motorrad Navigator V...
BMW Motorrad recommends and care products Apply the brakes in good time that you use BMW insect re- Damage to vehicle parts to allow the friction and heat to mover to soften and wash off Do not use solvents such as...
Corrosion or short circuit, dam- Clean trim panel components with a generous amount of water age to labels, seals, hydraulic with water and BMW Motorrad and motorcycle cleaner from the brake system, electrical system solvent cleaner. care series BMW Motorrad Care and the motorcycle seat Products.
Treat rubber components with BMW Motorrad recommends can result. These include, for water or BMW rubber-care the use of BMW Motorrad gloss example, spilled fuel, oil, grease, products. polish or agents containing brake fluid or bird excrement.
Stand the motorcycle in a dry room in such a way that there is no load on either wheel (preferably using the front- wheel and rear-wheel stand from BMW Motorrad). Restoring motorcycle to use Remove the protective wax coating. Cleaning the motorcycle.
Troubleshooting chart The engine does not start: Possible cause Rectification Side stand extended and gear engaged Engage neutral or fold in the side stand. Gear engaged and clutch not disengaged Select neutral or pull the clutch lever. No fuel in tank Refuel.
Page 249
Active route guidance is not displayed in the TFT display. Possible cause Rectification Navigation from the BMW Motorrad Connec- The BMW Motorrad Connected App is opened on ted App was not transmitted. the connected mobile end device prior to depar- ture.
Screw connections Front wheel Value Valid Wheel-speed sensor, front, to fork leg M6 x 16, Replace screw 8 Nm micro-encapsulated Brake caliper to telescopic fork M10 x 45 38 Nm Clamp of quick-release axle M8 x 35 Tightening sequence: Tighten screws six times in alternate sequence 19 Nm Axle screw in quick-release...
Page 251
Rear wheel Value Valid Rear quick-release axle in swinging arm M24 x 1.5 100 Nm mechanical Mirror arm Value Valid Mirror (lock nut) to clamping piece M10 x 1.25 Left-hand thread, 22 Nm Adapter to clamping block M10 x 14 - 4.8 25 Nm https://www.motorcycle-manual.com/...
3.0 l, with filter change Specification SAE 5W-40, API SJ / JASO MA2, Additives (e.g. molybdenum-based) are not permissible because they can attack coated components of the engine, BMW Motorrad recommends BMW Motorrad ADVANTEC Ultimate oil. BMW recommends https://www.motorcycle-manual.com/...
Oil additives BMW Motorrad recommends not using oil ad- ditives, because they can have a detrimental ef- fect on clutch operation. Do ask your authorised BMW Motorrad Retailer for the engine oils suit- able for your motorcycle. BMW recommends Engine...
Torque 83 Nm, at engine speed: 6000 min with power reduction to 35 kW 63 Nm, at engine speed: 4500 min Maximum engine speed max 9000 min Idle speed 1250 min , Engine at regular operating tempera- ture Clutch Clutch type Multiplate oil-bath clutch (anti-hopping) Transmission Type of transmission...
Final drive Type of final drive Chain drive Type of rear suspension Double arm aluminium swinging arm Final drive, number of teeth (Pinion / sprocket) 17/44 Frame Frame type Bridge-type steel frame in shell construction Type plate location Frame, front left at steering head Position of the vehicle identification number Frame, front right by steering head Chassis and suspension...
Rear wheel Type of rear suspension Double arm aluminium swinging arm Type of rear-wheel suspension Central spring strut with coil spring, adjustable rebound stage damping and spring preload Spring travel at rear wheel 170 mm, at rear wheel with low-slung 150 mm, at rear wheel Brakes Front wheel...
Wheels and tyres Recommended tyre combinations An overview of currently approved tyres is avail- able from your authorised BMW Motorrad Retailer or on the Internet at bmw-motorrad.com. Speed category, front/rear tyres V, required at least: 240 km/h...
Page 258
Front wheel Front-wheel type Aluminium cast wheel Front-wheel rim size 2.50" x 19" MTH2 Tyre designation, front 110/80 R 19 Load index, front tyre Permissible front-wheel imbalance max 5 g Balance weight for front wheel (One half of the max 80 g weights must be attached to the left and the other half to the right of the wheel rim) Rear wheel...
Tyre pressure Tyre pressure, front 2.2 bar, One-up, tyre cold 2.5 bar, Two-up and/or with luggage, tyre cold Tyre pressure, rear 2.5 bar, One-up, tyre cold 2.9 bar, Two-up and/or with luggage, tyre cold Electrical system Main fuse 40 A, Voltage regulator Fuse box 10 A, Slot 1: instrument cluster, alarm system (DWA), ignition lock, diagnostic socket, coil main...
Page 260
Battery Battery type AGM battery (Absorbent Glass Mat) Battery rated voltage 12 V Battery rated capacity 10 Ah Battery type (For Keyless Ride radio-operated key) with Keyless Ride CR 2032 Spark plugs Spark plugs, manufacturer and designation NGK LMAR8J-9E Light source Bulb for high-beam headlight Bulbs for the low-beam headlight Bulb for parking light...
Dimensions Length of motorcycle 2255 mm, through number plate carrier with low-slung 2240 mm, through number plate carrier Height of motorcycle min 1225 mm, Over windscreen, at DIN unladen weight with low-slung 1210 mm, Over windscreen, at DIN unladen weight Width of motorcycle 922 mm, with mirrors 988 mm, with cases...
Weights Vehicle kerb weight 224 kg, DIN unladen weight, ready for road, 90% load of fuel, without optional extras Permissible gross vehicle weight 440 kg Maximum payload 216 kg Performance figures Top speed >190 km/h with case 160 km/h with topcase 160 km/h https://www.motorcycle-manual.com/...
Retailer can provide informa- rect procedure Retailer or a specialist workshop tion on BMW services and the can also view data that is stored Risk of accident due to con- work undertaken as part of each in the electronic service booklet.
BMW Service To find out more about service, The BMW Service is carried out If you have a new BMW motor- go to: once a year. The scope of the cycle, you are protected by vari- service depends on the age of bmw-motorrad.com/service...
Maintenance schedule BMW Running-in check BMW Service, standard scope Engine-oil change, with filter Check valve clearances Replace all spark plugs Replace air filter insert Check or replace air filter insert Change brake fluid, entire system annually or every 10.000 km (whichever...
Maintenance confirmations BMW Service standard scope The repair tasks in the BMW Service standard scope are listed below. The actual scope of maintenance work applicable for your vehicle may vary. Performing vehicle test with BMW Motorrad diagnostic system Check coolant level...
Page 269
BMW pre-delivery BMW Running-in check Check carried out carried out at km Next service at the latest or, when reached earlier at km Stamp, signature Stamp, signature https://www.motorcycle-manual.com/...
Page 270
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 271
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 272
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 273
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 274
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 275
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 276
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 277
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 278
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 279
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 280
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Page 281
BMW Service Work performed carried out BMW Service Oil change, engine, with filter at km Checking valve clearance Renewing all spark plugs Next service Renewing air cleaner insert at the latest Checking or replacing air filter element (for maintenance) or, when reached earlier...
Service confirmations The table is used to verify maintenance and repair work as well as installed optional accessories and pur- chased special promotions. Work performed at km Date https://www.motorcycle-manual.com/...
Page 283
Work performed at km Date https://www.motorcycle-manual.com/...
Appendix Declaration of conformity for elec- Declaration of conformity for anti- tronic immobiliser ....284 theft alarm system ....322 Certificate for electronic immobil- iser .
Declaration of Conformity Austria Hiermit erklärt BECOM Electronics GmbH, dass der Funkanlagentyp EWS4 der Richtlinie Radio equipment electronic immobiliser 2014/53/EU entspricht. (EWS) Der vollständige Text der EU- Konformitätserklärung ist unter der folgenden Simplified EU Declaration of Conformity acc. Internetadresse verfügbar: Radio Equipment Directive 2014/53/EU after http://www.becom.at/de/download/ 12.06.2016 and during transition period...
Page 287
Cyprus Denmark Με την παρούσα ο/η BECOM Electronics GmbH, Hermed erklærer BECOM Electronics GmbH, at δηλώνει ότι ο ραδιοεξοπλισμός EWS4 πληροί την radioudstyrstypen EWS4 er i overensstemmelse οδηγία 2014/53/ΕΕ. med direktiv 2014/53/EU. Το πλήρες κείμενο της δήλωσης συμμόρφωσης EU-overensstemmelseserklæringens fulde tekst ΕΕ...
Page 288
Finland Greece BECOM Electronics GmbH vakuuttaa, että Με την παρούσα ο/η BECOM Electronics GmbH, radiolaitetyyppi EWS4 on direktiivin 2014/53/EU δηλώνει ότι ο ραδιοεξοπλισμός EWS4 πληροί την mukainen. οδηγία 2014/53/ΕΕ. EU-vaatimustenmukaisuusvakuutuksen Το πλήρες κείμενο της δήλωσης συμμόρφωσης täysimittainen teksti on saatavilla seuraavassa ΕΕ...
Page 289
Ireland Luxembourg Hereby, BECOM Electronics GmbH declares that Le soussigné, BECOM Electronics GmbH, the radio equipment type EWS4 is in compliance déclare que l'équipement radioélectrique du type with Directive 2014/53/EU. EWS4 est conforme à la directive 2014/53/UE. The full text of the EU declaration of conformity is Le texte complet de la déclaration UE de available at the following internet address: conformité...
Page 290
Netherlands Romania Hierbij verklaar ik, BECOM Electronics GmbH, dat Prin prezenta, BECOM Electronics GmbH declară het type radioapparatuur EWS4 conform is met că tipul de echipamente radio EWS4 este în Richtlijn 2014/53/EU. conformitate cu Directiva 2014/53/UE. De volledige tekst van de EU- Textul integral al declarației UE de conformitate conformiteitsverklaring kan worden geraadpleegd este disponibil la următoarea adresă...
Page 291
Slovakia BECOM Electronics GmbH týmto vyhlasuje, že rádiové zariadenie typu EWS4 je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: http://www.becom.at/de/download/ https://www.motorcycle-manual.com/...
FCC Approval This device complies with Any changes or modifi- Part 15 of the FCC rules. cations not expressly Ring aerial in the Operation is subject to the approved by the party ignition switch following two conditions: responsible for compliance (1) This device may not could void the user’s cause harmful inter-...
Page 293
Approbation de informations avec la clé de Toute modification contact via l'antenne qui n'aurait pas été la FCC annulaire. approuvée expressément Antenne annulaire Le présent dispositif est par l'organisme responsa- conforme à la partie 15 ble de l'homologation peut présente dans le des règles de la FCC.
Declaration of Conformity Bŭlgarski С настоящото Huf Hülsbeck & Fürst GmbH & Co. KG декларира, че този тип радиосъоръжение Radio equipment Keyless Ride HUF5750 е в съответствие с Директива 2014/53/ЕС. Simplified EU Declaration of Conformity acc. Цялостният текст на ЕС декларацията за Radio Equipment Directive 2014/53/EU after съответствие...
Page 295
Deutsch Español Hiermit erklärt Huf Hülsbeck & Fürst GmbH & Co. Por la presente, Huf Hülsbeck & Fürst GmbH & KG, dass der Funkanlagentyp HUF5750 der Co. KG declara que el tipo de equipo Richtlinie 2014/53/EU entspricht. radioeléctrico HUF5750 es conforme con la Der vollständige Text der EU- Directiva 2014/53/UE.
Page 296
Íslenska Lietuvių Hér Hülsbeck & Fürst GmbH & Co. KG að Aš, Huf Hülsbeck & Fürst GmbH & Co. KG, radíóbúnaður gerð HUF5750 tilskipunar patvirtinu, kad radijo įrenginių tipas HUF5750 2014/53/EB samsvarandi. atitinka Direktyvą 2014/53/ES. The fullur texti af ESB-samræmisyfirlýsing er í Visas ES atitikties deklaracijos tekstas prieinamas boði á...
Page 297
Nederlands Português Hierbij verklaar ik, Huf Hülsbeck & Fürst GmbH & O(a) abaixo assinado(a) Huf Hülsbeck & Fürst Co. KG, dat het type radioapparatuur HUF5750 GmbH & Co. KG declara que o presente tipo de conform is met Richtlijn 2014/53/EU. equipamento de rádio HUF5750 está...
Page 298
Slovensky Ελληνική Huf Hülsbeck & Fürst GmbH & Co. KG týmto Με την παρούσα ο/η Huf Hülsbeck & Fürst, vyhlasuje, že rádiové zariadenie typu HUF5750 je δηλώνει ότι ο ραδιοεξοπλισμός HUF5750 πληροί v súlade so smernicou 2014/53/EÚ. την οδηγία 2014/53/ΕΕ. Úplné...
Page 299
USA, Canada Any changes or modifications not expressly Product name: BMW Keyless Ride ID Device approved by the party responsible for FCC ID: YGOHUF5750 compliance could void the user’s authority to IC: 4008C-HUF5750 operate the equipment.
Page 300
Declaration Of Conformity We declare under our responsibility that the product BMW Keyless Ride ID Device (Model: HUF5750) camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards: 1.
Declaration of Conformity Austria Hiermit erklärt Schrader Electronics Ltd., dass der Funkanlagentyp BC5A4 der Richtlinie Radio equipment tyre pressure control 2014/53/EU entspricht. (RDC) Der vollständige Text der EU- Konformitätserklärung ist unter der folgenden Simplified EU Declaration of Conformity acc. Internetadresse verfügbar: Radio Equipment Directive 2014/53/EU after http://www.tpmseuroshop.com/documents/declar 12.06.2016 and during transition period...
Page 302
Bulgaria Úplné znění EU prohlášení o shodě je k dispozici С настоящото Schrader Electronics Ltd. na této internetové adrese: декларира, че този тип радиосъоръжение http://www.tpmseuroshop.com/documents/declar BC5A4 е в съответствие с Директива ation_conformities 2014/53/ЕС. Цялостният текст на ЕС декларацията за Germany съответствие...
Page 303
Estonia Finland Käesolevaga deklareerib Schrader Electronics Schrader Electronics Ltd. vakuuttaa, että Ltd., et käesolev raadioseadme tüüp BC5A4 radiolaitetyyppi BC5A4 on direktiivin 2014/53/EU vastab direktiivi 2014/53/EL nõuetele. mukainen. ELi vastavusdeklaratsiooni täielik tekst on EU-vaatimustenmukaisuusvakuutuksen kättesaadav järgmisel internetiaadressil: täysimittainen teksti on saatavilla seuraavassa http://www.tpmseuroshop.com/documents/declar internetosoitteessa: ation_conformities...
Page 304
United Kingdom http://www.tpmseuroshop.com/documents/declar Hereby, Schrader Electronics Ltd. declares that ation_conformities the radio equipment type BC5A4 is in compliance with Directive 2014/53/EU. Hungary The full text of the EU declaration of conformity is Schrader Electronics Ltd. igazolja, hogy a BC5A4 available at the following internet address: típusú...
Page 305
Italy Le texte complet de la déclaration UE de Il fabbricante, Schrader Electronics Ltd., dichiara conformité est disponible à l'adresse internet che il tipo di apparecchiatura radio BC5A4 è suivante: conforme alla direttiva 2014/53/UE. http://www.tpmseuroshop.com/documents/declar Il testo completo della dichiarazione di conformità ation_conformities UE è...
Page 306
Netherlands O texto integral da declaração de conformidade Hierbij verklaar ik, Schrader Electronics Ltd., dat está disponível no seguinte endereço de Internet: het type radioapparatuur BC5A4 conform is met http://www.tpmseuroshop.com/documents/declar Richtlijn 2014/53/EU. ation_conformities De volledige tekst van de EU- conformiteitsverklaring kan worden geraadpleegd Romania op het volgende internetadres: Prin prezenta, Schrader Electronics Ltd.
Page 307
Slovenia Schrader Electronics Ltd. potrjuje, da je tip radijske opreme BC5A4 skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: http://www.tpmseuroshop.com/documents/declar ation_conformities Slovakia Schrader Electronics Ltd. týmto vyhlasuje, že rádiové zariadenie typu BC5A4 je v súlade so smernicou 2014/53/EÚ.
Certification Tire Pressure Control (TPC) FCC ID: MRXBC54MA4 FCC ID: MRXBC5A4 IC: 2546A-BC54MA4 IC: 2546A-BC5A4 This device complies with Part 15 of the FCC Le présent appareil est conforme aux CNR Rules and with Industry Canada license-exempt d'Industrie Canada applicables aux appareils RSS standard(s).
Declaration of Conformity Manufacturer and Address Manufacturer: Robert Bosch Car Multimedia GmbH Radio equipment TFT instrument cluster Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after Austria 12.06.2016 and during transition period Hiermit erklärt Robert Bosch Car Multimedia GmbH, dass der Funkanlagentyp ICC6.5in der Richtlinie 2014/53/EU entspricht.
Page 310
Bulgaria Germany С настоящото Robert Bosch Car Multimedia Hiermit erklärt Robert Bosch Car Multimedia GmbH декларира, че този тип GmbH, dass der Funkanlagentyp ICC6.5in der радиосъоръжение ICC6.5in е в съответствие с Richtlinie 2014/53/EU entspricht. Директива 2014/53/ЕС. Der vollständige Text der EU- Цялостният...
Page 311
Spain France Por la presente, Robert Bosch Car Multimedia Le soussigné, Robert Bosch Car Multimedia GmbH declara que el tipo de equipo GmbH, déclare que l'équipement radioélectrique radioeléctrico ICC6.5in es conforme con la du type ICC6.5in est conforme à la directive Directiva 2014/53/UE.
Page 312
Croatia Italy Robert Bosch Car Multimedia GmbH ovime Il fabbricante, Robert Bosch Car Multimedia izjavljuje da je radijska oprema tipa ICC6.5in u GmbH, dichiara che il tipo di apparecchiatura skladu s Direktivom 2014/53/EU. radio ICC6.5in è conforme alla direttiva Cjeloviti tekst EU izjave o sukladnosti dostupan je 2014/53/UE.
Page 313
Latvia Poland Ar šo Robert Bosch Car Multimedia GmbH Robert Bosch Car Multimedia GmbH niniejszym deklarē, ka radioiekārta ICC6.5in atbilst Direktīvai oświadcza, że typ urządzenia radiowego ICC6.5in 2014/53/ES. jest zgodny z dyrektywą 2014/53/UE. Pilns ES atbilstības deklarācijas teksts ir pieejams Pełny tekst deklaracji zgodności UE jest dostępny šādā...
Page 314
Sweden Härmed försäkrar Robert Bosch Car Multimedia GmbH att denna typ av radioutrustning ICC6.5in överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: http://cert.bosch-carmultimedia.net Slovenia Robert Bosch Car Multimedia GmbH potrjuje, da je tip radijske opreme ICC6.5in skladen z Direktivo 2014/53/EU.
Declaration of Conformity Turkey Robert Bosch Car Multimedia GmbH, ICC6.5in tipi telsiz sisteminin 2014/53/EU Radio equipment TFT instrument cluster nolu yönetmeliğe uygun olduğunu beyan eder. AB Uygunluk Beyanı'nın tam metni, aşağıdaki For all Countries without EU internet adresinden görülebilir: http://cert.bosch- carmultimedia.net Technical information BT operating frq.
Page 316
Canada Mexico This device complies with Industry Canada’s La operación de este equipo está sujeta a las licence-exempt RSSs and part 15 of the FCC siguientes dos condiciones: Rules. Operation is subject to the following two (1) es posible que este equipo o dispositivo no conditions: cause interferencia perjudicial y (1) this device may not cause interference, and...
Page 317
Thailand Le présent appareil est conforme aux CNR เครื ่ อ งโทรคมนาคมและอุ ป กรณ์ น ี ้ d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée มี ค วามสอดคล้ อ งตามข้ อ กํ า หนดของ กทช. aux deux conditions suivantes : (1) l'appareil ne (This telecommunication equipments is in doit pas produire de brouillage, et (2) l'appareil compliance with NTC requirements)
Page 318
Declaration of Conformity Manufacturer and Address Manufacturer: Robert Bosch Car Multimedia GmbH Radio equipment intelligent emergency call Adress: Robert Bosch Str. 200, 31139 Hildesheim, GERMANY Simplified EU Declaration of Conformity acc. Radio Equipment Directive 2014/53/EU after Austria 12.06.2016 and during transition period Hiermit erklärt Robert Bosch Car Multimedia GmbH, dass der Funkanlagentyp TPM E-CALL EU der Richtlinie 2014/53/EU entspricht.
Page 319
Bulgaria Germany С настоящото Robert Bosch Car Multimedia Hiermit erklärt Robert Bosch Car Multimedia GmbH декларира, че този тип GmbH, dass der Funkanlagentyp TPM E-CALL радиосъоръжение TPM E-CALL EU е в EU der Richtlinie 2014/53/EU entspricht. съответствие с Директива 2014/53/ЕС. Der vollständige Text der EU- Цялостният...
Page 320
Spain France Por la presente, Robert Bosch Car Multimedia Le soussigné, Robert Bosch Car Multimedia GmbH declara que el tipo de equipo GmbH, déclare que l'équipement radioélectrique radioeléctrico TPM E-CALL EU es conforme con du type TPM E-CALL EU est conforme à la la Directiva 2014/53/UE.
Page 321
Croatia Italy Robert Bosch Car Multimedia GmbH ovime Il fabbricante, Robert Bosch Car Multimedia izjavljuje da je radijska oprema tipa TPM E-CALL GmbH, dichiara che il tipo di apparecchiatura EU u skladu s Direktivom 2014/53/EU. radio TPM E-CALL EU è conforme alla direttiva Cjeloviti tekst EU izjave o sukladnosti dostupan je 2014/53/UE.
Page 322
Latvia Poland Ar šo Robert Bosch Car Multimedia GmbH Robert Bosch Car Multimedia GmbH niniejszym deklarē, ka radioiekārta TPM E-CALL EU atbilst oświadcza, że typ urządzenia radiowego TPM E- Direktīvai 2014/53/ES. CALL EU jest zgodny z dyrektywą 2014/53/UE. Pilns ES atbilstības deklarācijas teksts ir pieejams Pełny tekst deklaracji zgodności UE jest dostępny šādā...
Page 323
Sweden Härmed försäkrar Robert Bosch Car Multimedia GmbH att denna typ av radioutrustning TPM E- CALL EU överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: http://cert.bosch-carmultimedia.net Slovenia Robert Bosch Car Multimedia GmbH potrjuje, da je tip radijske opreme TPM E-CALL EU skladen z Direktivo 2014/53/EU.
Page 324
Declaration of Conformity Austria Hiermit erklärt Meta System S.p.A., dass der Funkanlagentyp TXBMWMR der Richtlinie Radio equipment anti-theft alarm (DWA) 2014/53/EU entspricht. Der vollständige Text der EU- Simplified EU Declaration of Conformity acc. Konformitätserklärung ist unter der folgenden Radio Equipment Directive 2014/53/EU after Internetadresse verfügbar: 12.06.2016 and during transition period https://docs.metasystem.it/...
Page 325
Cyprus Denmark Με την παρούσα ο/η Meta System S.p.A., Hermed erklærer Meta System S.p.A., at δηλώνει ότι ο ραδιοεξοπλισμός TXBMWMR radioudstyrstypen TXBMWMR er i πληροί την οδηγία 2014/53/ΕΕ. overensstemmelse med direktiv 2014/53/EU. Το πλήρες κείμενο της δήλωσης συμμόρφωσης EU-overensstemmelseserklæringens fulde tekst ΕΕ...
Page 326
Finland Greece Meta System S.p.A. vakuuttaa, että Με την παρούσα ο/η Meta System S.p.A., radiolaitetyyppi TXBMWMR on direktiivin δηλώνει ότι ο ραδιοεξοπλισμός TXBMWMR 2014/53/EU mukainen. πληροί την οδηγία 2014/53/ΕΕ. EU-vaatimustenmukaisuusvakuutuksen Το πλήρες κείμενο της δήλωσης συμμόρφωσης täysimittainen teksti on saatavilla seuraavassa ΕΕ...
Page 327
Ireland Luxembourg Hereby, Meta System S.p.A. declares that the Le soussigné, Meta System S.p.A., déclare que radio equipment type TXBMWMR is in l'équipement radioélectrique du type TXBMWMR compliance with Directive 2014/53/EU. est conforme à la directive 2014/53/UE. The full text of the EU declaration of conformity is Le texte complet de la déclaration UE de available at the following internet address: conformité...
Page 328
Netherlands Romania Hierbij verklaar ik, Meta System S.p.A., dat het Prin prezenta, Meta System S.p.A. declară că tipul type radioapparatuur TXBMWMR conform is met de echipamente radio TXBMWMR este în Richtlijn 2014/53/EU. conformitate cu Directiva 2014/53/UE. De volledige tekst van de EU- Textul integral al declarației UE de conformitate conformiteitsverklaring kan worden geraadpleegd este disponibil la următoarea adresă...
Page 329
Slovakia Meta System S.p.A. týmto vyhlasuje, že rádiové zariadenie typu TXBMWMR je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: https://docs.metasystem.it/ https://www.motorcycle-manual.com/...
Page 330
Self-diagnosis, 160 Brake pads Abbreviations and symbols, 8 Checking front, 193 Status indicators, 47 checking rear, 193 Average values Control, 25 reset, 99 Running in, 162 Engineering details, 176 Brakes operating, 104 ABS Pro in detail, 178 Battery Self-diagnosis, 159 ABS Pro depending on riding Charging a disconnected Status indicators, 46, 76...
Page 340
2.5 bar, One-up, tyre cold 2.9 bar, Two-up and/or with luggage, tyre cold You can find further information on all aspects of your vehicle at: bmwmotorrad.com BMW recommends *01409446811* https://www.motorcycle-manual.com/ Order No.: 01 40 9 446 811 08.2019, 3rd edition, 01...
Need help?
Do you have a question about the F 750 GS and is the answer not in the manual?
Questions and answers