Disengaging Diagnostic Connector; Securing The Diagnostic Connector; Incorrect Procedure Followed When Loosening Diagnostic Connector - BMW F 750 GS Rider's Manual

224 MAINTENANCE
Fuse box
7.5 A (Slot 2: multifunction
switch left, tyre pressure con-
trol (RDC))
Insert the fuse box.
Installing seat (
DIAGNOSTIC CONNECTOR
Disengaging diagnostic
connector
CAUTION
Incorrect procedure followed
when loosening the dia-
gnostic connector for the
on-board diagnosis
Motorcycle experiences mal-
functions
Only have the diagnostic
connector loosened by a
specialist workshop or other
authorised persons during
your next BMW Service ap-
pointment.
Have the work performed
by appropriately trained
staff.
Refer to the vehicle manu-
facturer specifications.
Removing seat (
115).
115).
Press the locks 1 on either
side.
Remove diagnostic con-
nector 2 from bracket 3.
The interface to the diagnosis
and information system
can be connected to the
diagnostic connector 2.
Securing the diagnostic
connector
Disconnect the interface for
the diagnosis and information
system.
Insert diagnostic connector 2
in bracket 3.
The locks 1 engage.
Installing seat ( 115).