Table of Contents
Advertisement
Raise the front wheel and in-
sert quick-release axle 4 until
seated.
Remove front-wheel stand
and firmly compress front
forks several times. Do not
operate the brake lever in this
process.
Install the front-wheel stand
(
191).
Install axle screw 2 and
tighten to the specified
torque. Counter-hold quick-
release axle on the right side.
Axle screw in front
quick-release axle
50 Nm
Tighten left axle clamping
screws 3 to the specified
torque.
Clamp of quick-release
axle
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Tighten right axle clamping
screws 1 to the specified
torque.
207
Advertisement
Table of Contents
