Resetting The Camera - FLIR Ariel CM-3304 Series User And Installation Manual

Installing and Connecting the Camera
4.4.4

Resetting the Camera

The camera includes a reset button, which is located on the camera's printed circuit board (PCB), along
with the camera's microSD card slot.
Figure 28: Camera Reset Button/MicroSD Slot
To reboot the camera (Partial Reset)
Press the Default button for approximately five seconds. The unit reboots.
Configured settings are saved.
To restore factory defaults (Full Reset)
Press the Default button continuously for 30 seconds.
The unit restores factory defaults, including the original network settings.
If a Basic Video Analytics license was in use, it will need to be re-loaded.
.
CM-3304/CM-3308 User and Installation Guide
March 10, 2019 25