Firmware - FLIR Ariel CM-3304 Series User And Installation Manual

5.3.1.2.3 Firmware

The Firmware screen displays and is used to update the system firmware, and to display the hardware
version, product name (model number), product serial number, and product MAC address. To access the
Firmware screen, select Basic Configuration > Firmware.
To update system firmware
1. Click Browse to locate the firmware file.
2. Select the file. The file name is displayed (for example, ArielFHD_20160308.tar).
Note:
If you are upgrading from the GA firmware version 01.05.32 or 01.05.32.5 to version
01,05.37.4 or higher, you must update the .bin file from DNA version 2.1.2.4 or higher.
3. Click Upgrade. The upgrade process takes about three minutes. After the firmware has upgraded
successfully, the camera reboots. The following dialog box is displayed:
4. Click OK. The Live screen opens.
5. When the Internet Explorer dialog box asks you to close the window, click Yes. The window
closes.
6. Open a new window and enter the camera's URL. The Login window opens. See
Window.
7. Enter your user credentials and log into the camera. The new firmware version is displayed in the
Firmware Version text box.
March 10, 2019
Figure 40: Firmware Screen
Figure 41: Rebooting Complete Dialog Box
CM-3304/CM-3308 User and Installation Guide
Accessing the CM-330X via a Web Browser
Figure 14: Login
37