Mounting Instructions - FLIR Ariel CM-3304 Series User And Installation Manual

·
Plan ahead to determine where to install infrastructure weatherproof equipment. Whenever
possible, ground components to an outdoor ground.
4.3

Mounting Instructions

Follow the instructions in Installation Guides listed in the Related Information section of the
Contents section.
To mount the camera in the ceiling
1. Drill the screw holes on the surface with the supplied drilling template. If you need to route the
cables from the bottom of the camera, cut a cable hole in the surface.
2. Remove the lower dome by loosening the set screws with the supplied Torx wrench
March 10, 2019
Figure 7: Drill Template
Figure 8: Open the Dome Cover
CM-3304/CM-3308 User and Installation Guide
Installing and Connecting the Camera
Package
13