Picture Adjustment - FLIR Ariel CM-3304 Series User And Installation Manual

·
Time – See the explanation in the
·
Sensitivity – See the explanation in the
In the IR Control section, configure the following settings:
·
Mode – See the explanation in the
·
LED Brightness – See the explanation in the
Click Reset if you want to return to factory default settings.
5.3.3.2

Picture Adjustment

The Picture Adjustment screen enables you to configure picture quality, color and mirror flip settings.
Note:
Settings are saved automatically. Clicking Reset returns the settings to factory defaults.
To configure quality settings
1. In the Quality section, configure the following settings:
·
Sharpness ? Set the slider between 0-100, which provides the highest
sharpness around the edges and for small features. The default setting is 40.
·
3D Noise Reduction ? Set the slider between 0-100. The default setting is 20.
·
Gamma Correction ? From the drop-down list, select 0.45 or 1. The default
setting is 0.45. Gamma correction is used to ensure faithful reproduction of an
image. When gamma = 1, the original image is the same as the image
displayed on your screen. If the gamma is set at 0.45, there will be less
contrast.
To configure color settings
2. In the Color section, configure the following settings:
·
Brightness ? Set the image brightness between -100 to 100, which provides
the highest brightness. The default is 0.
March 10, 2019
Auto Shutter section above.
Auto Shutter section above.
Auto Mode section above.
Auto Mode
Figure 101: Picture Adjustment Screen
CM-3304/CM-3308 User and Installation Guide
Accessing the CM-330X via a Web Browser
section above.
117