Object Dropped - FLIR Ariel CM-3304 Series User And Installation Manual

Accessing the CM-330X via a Web Browser
Once the rule has been defined, do not disturb the scene for about 30 seconds to a minute.
See the Initial Settings section for more information on the setup process:
Zone Settings:
This section allows the user to create 3 zones in order to configure the desired detection areas.
Clicking and dragging on the video scene will produce a re-sizable box at can be moved and sized to mark
the desired area for object removal detection
Clicking on the button for each zone, will allow the user to draw the box according to that zone
(identified by the color).
Basic Settings:
For general "Basic Settings" see Basic Settings
Removal Duration
This section is used to configure the duration that an object had removed from a defined region in order for
a rule to be triggered. This can be changed from the default of 5 second by dragging the slider or typing a
number into the text box.
See the following sections for more information on Advanced options and Analytics actions (completion of
rule configuration)
Advanced Options
Analytics Actions
The Video Analytics > Object Dropped screen is used for configuring the Dropped Object detection
analytic capability.
This page allows you to:
·
Configure a object dropped detection area using 3 to 8 points
CM-3304/CM-3308 User and Installation Guide
March 10, 2019 83