Events Source; Defocus - FLIR Ariel CM-3304 Series User And Installation Manual

Accessing the CM-330X via a Web Browser
5.3.1.5

Events Source

The Events Source tab is used for configuring general settings related to event notification. It includes the
following screens:

Defocus

Alarm
5.3.1.5.1 Defocus
The Events Source > Defocus screen is used for defining the actions to be taken when triggered by a
defocus event: storing a snapshot; recording on the edge; defining email headers; defining text for the OSD;
and setting the arming schedule. To use these functions, select the Enable checkbox. By default, Enable
is not checked.
To define the method to store a snapshot
1. In the Snapshot section, select the Store on Edge checkbox to store a snapshot on the camera's
microSD card. By default, it is not checked.
2. In the Snapshot section, select the Store to FTP checkbox to store a snapshot on a remote FTP
site. By default, it is not checked.
To record an event on the camera
3. In the Recording section, select the Record on Edge checkbox to record a clip on the camera's
microSD card. By default, it is not checked.
4. Click Save.
To enable sending an email notification
5. In the Email section, select the Enable checkbox. By default, Enable is not checked.
6. In the Subject text box, enter the email subject text.
7. In the Message text box, enter the email message text.
8. Click Save.
56
Audio Motion
Figure 68: Events Source > Defocus Screen
CM-3304/CM-3308 User and Installation Guide
Network Schedule Tampering
March 10, 2019