Share Content From An Hdmi Or Vga Source; Supported Content Resolutions And Refresh Rates; Polycom People+Content Ip - Poly Polycom RealPresence Group Series User Manual

Share Content from an HDMI or VGA Source

Before you prepare to show content, make sure the computer is powered on and connected to the HDMI
or VGA video input port on the RealPresence Group Series system.
Procedure
1. Press then select Content.
2. Choose the HDMI or VGA-connected device.

Supported Content Resolutions and Refresh Rates

Before you show content, check that your computer's video output is set to use one of the supported
resolutions and refresh rates listed in the following table.
Resolution
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200

Polycom People+Content IP

The People+Content IP application enables you to send content from a computer that is not connected
directly to the RealPresence Group Series system or Polycom touch devices.
Keep the following points in mind when using the People+Content IP application:
▪ The application provides video-only content. No audio is shared.
▪ The application supports any computer desktop resolution with color set to 16-bit or higher.
▪ Your computer resolution can be set to anything, but the application scales images to 1024x768 or
1280x720.
Refresh rates (Hz)
56, 60, 72, 75, 85
60, 70, 75, 85
50, 60
60
60, 75
60
60
60
60
Sharing Content
22