Front Panel Removal - Haier GE APPLIANCES Connect Series Service Manual

Maintenance
Step
5. Remove the right side plate.
6. Install the right side plate
7. Install the front panel.
8. Install the grill.

Front Panel Removal

Note: Be sure power is off before removing front panel.
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Unscrew the screws that connect the
right side plate to the electric box and
the screws around the right side plate.
Screw up the screws around the right
side plate. Be careful to handle well the
clasps at the bottom of the right side
plate.
Install the front panel by mounting on 6
clasps on its both sides. Please note that
there is one screw on the lower right
side.
Attach the grill back in place and tighten
up the screws.
49