Maintenance
Step
11. Install the upper cover
plate.
Model: AUH4860ZGDA
Note: Be sure the refrigerant is recovered and power is isolated before removing the compressor.
Step
1. Remove wires.
2. Loosen the securing screws
at the foot of compressor.
Front Panel Removal
Note: Be sure power is isolated before removing from panel.
Picture
Compressor Disassembly
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Tighten up the screws around the upper
cover plate.
Work instruction
Loosen the securing screws of the wires
with a screwdriver.
Remove the wires.
Note: When removing the wires, mark
the wire terminals corresponding
to their color so as to avoid
misconnection.
Use a wrench to twist off the screw
nuts at the foot of compressor.
63