Haier GE APPLIANCES Connect Series Service Manual page 63

Maintenance
Step
3. Remove the front grill.
4. Remove the front panel.
5. Install the front panel.
6. Install the grill.
Front Panel Removal
Note: Be sure power is isolated before removing from panel.
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Unscrew the screws of the front grill with a
screwdriver.
Unscrew the screws that connect the front
panel to the middle insulating board and
screws around the front panel.
Install the front panel by mounting on 6
clasps on its both sides. Please note that
there is one screw on the lower right side.
Attach the grill back in place and tighten
up the screws.
61