Removal Of Major Components - Haier GE Connect Series Service Manual

Maintenance

Removal of Major Components

Removal of ODU Major Components
Picture
52
Name Function
Through compression, the low pressure refrigerant becomes
pressurized. As its pressure and temperature both rise, it
Compressor
becomes high pressure and high temperature refrigerant. It is the
power drive of the system.
It is used to change the direction of refrigerant flow for heating
4-way valve
and cooling.
The power drive of the fan. It enables the fan to run so as to
Motor provide air to flow across the coil and transfer heat from the coil
to the air.
It is used to provide smooth currents of air for forced convection
Fan
and heat exchange of condenser and evaporator.
Installed at the suction side of compressor, it can separate the
liquefied refrigerant from the gaseous refrigerant to make sure
Gas liquid
that only gaseous refrigerant will be drawn into the compressor.
separator
Ineffective compression or slugging phenomenon will occur if
liquid refrigerant enters the compressor.
CONNECT SERIES SERVICE MANUAL