Maintenance
Step
5. Install the fan.
6. Install the grill.
Fan and Motor Removal
Note: Be sure to isolate power before removing the fan.
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Install the fan in place. Put on the
gasket and use a wrench to secure
the screw nut.
Note: After installing the fan, turn
the fan by hand to see if it can run
normally. If not, please check for the
reason.
After replacing the motor, use a
screwdriver to tighten up the screw
bolt that secures the motor. Arrange
the wires according to the wiring
diagram.
69