Haier GE APPLIANCES Connect Series Service Manual page 78

Split heat pumps
Table of Contents

Advertisement

Maintenance
Step
1. Remove the upper
panel.
2. Remove the fan.
3. Remove the motor.
4. Reinstall the fan.
76
Fan Motor Disassembly and Assembly
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Loosen screws round the upper panel
with a screwdriver.
Remove the upper panel from unit.
Disconnect the wires of the fan from
the wiring terminal and draw them
out.
Loosen screws located at the front of
the fan with a screwdriver.
Remove the fan from the unit.
Disconnect the wires of the fan from
the wiring terminal and draw them
out.
Loosen screws located at the front of
the fan with a screwdriver.
Remove the fan from the unit.
Place the motor at the proper
position.
Tighten screws fixing the motor and
fan wheel.
Tighten screw bolts fixing the motor
bracket.
After the installation, reassemble the
unit as before.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents