Haier GE APPLIANCES Connect Series Service Manual page 62

Maintenance
Note: Recover all refrigerant and isolate power before removing the electronic expansion valve.
Step
7. Check and open the upper
and front panels.
Model: AUH4860ZGDA
Step
1. Remove the upper cover
plate.
2. Remove the front plate.
60
Electronic Expansion Valve Removal
Picture
Front Panel Removal
Note: Be sure power is isolated before removing from panel.
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Check whether each component and
connection wire is well connected.
If everything is OK, install the upper,
left and right panels. Tighten up the
screws.
Work instruction
Unscrew the screws of the upper cover
plate with a screwdriver.
Unscrew the screws of the front plate with
a screwdriver.