Configuration
5.9
Firmware & Info Page
On the Firmware & Info page, you can:
·
Specify a unique name for the camera
·
Upgrade the camera's firmware
·
Reset the camera to its factory defaults
·
Reboot the camera
·
Define a log level and download system information
Name
Specify a unique, friendly name for the camera, using only alphanumeric characters. The default name for
the camera is the camera model followed by the camera's serial number.
To upgrade the camera's firmware:
1. Make sure the camera has been recently rebooted.
2. Under Upgrade version, click Find file.
3. On your computer or network, browse to and select the firmware file.
Caution
Only upgrade to firmware developed for Quasar CP-6408 cameras.
CP-6408 Range Installation and User Guide - Revision 120 - September 2020
This document does not contain any export-controlled inf ormation.
53