Cyber Page; Certificates - FLIR Quasar CP-6408-21-I Installation And User Manual

Configuration
·
Alarm Auto Ack—Yes or No
·
Enabled—Yes or No
·
Reset Interval (for output pins only)—between 0-600 seconds; specifying 0 seconds disables the auto
reset
Related Operation and Configuration Information
For information about changing the current state of the input and output pins, see
For more information about how to configure the device managing the external I/O connections, refer to the
device's documentation.
5.7

Cyber Page

The Cyber page provides security configuration settings for:
·

Certificates

·
IEEE 802.1X-compliant communication
·
Transport Layer Security (TLS) and secure HTTP (HTTPS) communication
·
Other cybersecurity services
Changes to the security configuration settings on the Cyber page do not immediately take effect. To apply
changes, click Save and then reboot the camera.
5.7.1 Certificates
Before you can enable TLS/HTTPS or 802.1X, you need to generate or upload a valid certificate. You can:
·
Use the camera's web page to generate a self-signed certificate.
·
Upload a self-signed certificate.
·
Upload a certificate signed by a third-party.
CP-6408 Range Installation and User Guide - Revision 120 - September 2020
This document does not contain any export-controlled inf ormation.
I/O Page.
49