Video Page - FLIR Quasar CP-6408-21-I Installation And User Manual

Operation
Pan, Tilt, and Zoom (PTZ)
You can toggle controlling the camera's pan and tilt between:
When the mouse pointer is over live video, it becomes a directional arrow. To move the
camera, you can:
Emulated
·
Click and release—Moves the camera once.
Joystick
·
Click and hold—Moves the camera until it reaches its physical limit or you release.
·
Click and drag—Moves the camera as you drag the mouse.
When the mouse pointer is over live video, it becomes a crosshairs. Clicking and
Crosshairs
releasing centers the camera on the crosshairs location.
You can zoom in and out using:
·
The onscreen buttons—Click once or click and hold for continuous zoom.
·
The mouse wheel, when the mouse pointer is over live video.
Tip
Zooming in and out affects the video streams, unlike the Live Video Refresh Rate setting.
System Settings and Other Options
Users assigned the admin or expert role can click System Settings to configure the camera. For more
information, see the Configuration
Additional choices are for Help and Logout.
4.3

Video Page

The camera provides two video streams (V1 and V2). Video
streams are available for viewing using a client program or
third-party ONVIF systems.
In general, it is not necessary to modify the default
parameters. In some cases, such as when an IP video stream
is sent over a wireless network, it can be useful to tune the
video streams to reduce the bandwidth requirements. To
modify the parameters for a particular video stream, click the
relevant button (V1 or V2).
Tip
On the camera web page, the live video is not the actual video stream. Changes to stream settings might
not affect the live video. Check any changes to stream settings using a client program or third-party
ONVIF system.
Visible 1 / Visible 2
Codec options for the visible streams are H.264 or MJPEG.
CP-6408 Range Installation and User Guide - Revision 120 - September 2020
chapter.
This document does not contain any export-controlled inf ormation.
31