Remote Display - Enable/Disable - Datalogic Magellan 8300 Technical Manual

Remote Display — Enable/Disable
NOTE
Technical Guide
The scanner-scale can be configured to operate with or without a Remote
Display.
Recalibration/recertification may be required when adding a Remote Display.
Consult your local Weights and Measures authority.
If this feature is enabled the scanner-scale will expect that it is connected to
a Remote Display, and will indicate an error if one is not. See
Error Codes, for more information.
REMOTE DISPLAY = DISABLE
REMOTE DISPLAY = ENABLE
Scale Features
Chapter 3,
5-11