Connections - Datalogic Magellan 8300 Technical Manual

Connections

Scanner Right Profile
EAS Port
EAS PORT
· Test Port
Connection to
· On Screen
external EAS device.
Controls EAS
· Application Download
deactivation system.
· RS-232 Handheld
· Auxiliary RS-232
Technical Guide
Two connector panels are located on either side of the scanner as shown in
. The appearance of these panels will vary depending upon the
Figure 1-2
factory options purchased with your model. Additionally, a service "pig-
tail" extends from the scanner's base to connect the control panel cable
from the Bonnet area.
Figure 1-2. Connectors
Aux. Port Power
AUXILIARY PORT POWER
AC Brick Input
OR
Programming (OSP)
Power off Terminal
(POT) Brick Input
Scanner Input
Label Data Output
Connection to
this port is
Optional
Control Panel
Service Loop
POS Terminal
POS TERMINAL
· Label Data
· Scale Data (for
single cable interfaces)
· Application Download
(where appropriate)
Scanner Left Profile
0.00
Remote Display Scale Host
REMOTE DISPLAY SCALE HOST
Drives Remote Display Scale Data (dual
cable scanner/scale)
Models with scale Dual cable units only.
only (Scale connection may
be handled through
POS Terminal port)
Connections
1-3