Datalogic Magellan 8300 Technical Manual page 78

Interface Type — continued
NOTE
CAUTION
5-14
4. Complete the programming sequence by scanning the SWITCH
bar code.
Once the correct interface has been set, it will be necessary to proceed to
the appropriate pages in this manual that select parameters and options for
that interface. For example, if RS-232 is selected, turn to the pages in this
manual headed as features specific to the RS-232 interface.
5. Connect new interface cable(s).
RS-232 Interface Selection
Remember to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
Great care should be taken to select the correct interface type, since you can
cause damage to the scanner and/or POS terminal by attempting to change
to an incompatible interface. ALWAYS make interface selections with the
host cable DISCONNECTED.
INTERFACE TYPE = RS-232 STANDARD
®
Magellan 8300/8400