Datalogic Magellan 8300 Technical Manual page 39

329mm
292.5mm
325mm
Technical Guide
Figure 2-18. Physical Measurements: Remote Display
18.5mm
Dual Display
28.4mm
60mm
112mm
116.39mm
41.99mm
85.1mm
5. Feed the entire length of the Remote Scale Display interface cable
through the cable routing hole so that the assembled Remote Scale
Display can be positioned over the mounting screw holes.
6. If present, remove the rubber band from the connector end.
7. Install mounting screws or bolts to complete the installation of the
Remote Scale Display. Take care not to pinch or pierce the interface
cable while securing the Remote Scale Display to the checkstand.
Remote Scale Display Placement/Installation
Single Display
60mm
112mm
227.5mm
25.5mm
264mm
116.39mm
2-23