Guide To Installation - Datalogic DS2200 Installation Manua

GUIDE TO INSTALLATION

The following can be used as a checklist to verify all the necessary steps for
complete installation of the DS2200 scanner.
1. Read all information in the section "Safety Precautions" at the beginning
of this manual.
2. Correctly position and mount the scanner for barcode reading according
to the information in par. 2.2, 2.4 and 3.4.
3. Provide correct system cabling according to the signals necessary (see
all applicable sub-paragraphs under 2.3). See also sub-paragraphs
under 2.5 for reference.
4. Install the Configuration Disk.
Upon successful completion of the installation, the readme.hlp file is
opened, giving details about how to get started configuring your scanner.
See also the Guide to Rapid Configuration link.
Specific parameter details are available in the Help On Line.
The installation is now complete.
iv
Fine tuning of the scanner position for
barcode reading can be accomplished using
the Test Mode as described in WinHost.
NOTE