Navigating The Smt Interface; Table 38 Main Menu Commands - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

10.4 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your G-
1000 v2. Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 38 Main Menu Commands

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Entering information Type in or press
Required fields
N/A fields
Save your
configuration
Exit the SMT
After you enter the password, the SMT displays the main menu, as shown next.
Chapter 10 Introducing the SMT
KEYSTROKE DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
[ESC] Press [ESC] to move back to the previous menu.
Press [SPACE BAR] Fields beginning with "Edit" lead to hidden menus and
to change No to Yes have a default setting of No. Press [SPACE BAR] once to
then press [ENTER]. change No to Yes, then press [ENTER] to go to the
"hidden" menu.
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field.
[DOWN] arrow keys. You can also use the [UP]/[DOWN] arrow keys to move to
the previous and the next field, respectively.
You need to fill in two types of fields. The first requires you
[SPACE BAR], then to type in the appropriate information. The second allows
press [ENTER]. you to cycle through the available choices by pressing
[SPACE BAR].
?
< > or ChangeMe All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the
message "Press ENTER to confirm or ESC to cancel".
Saving the data on the screen will take you, in most cases
to the previous menu.
Type 99, then press Type 99 at the main menu prompt and press [ENTER] to
[ENTER]. exit the SMT interface.
ZyXEL G-1000 v2 User's Guide
95