System Information And Diagnosis; System Status; Figure 60 Menu 24 System Maintenance - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.4.
These tools include updates on system status, port status, log and trace capabilities and
upgrades for the system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu and press [ENTER] to open Menu 24 – System Maintenance, as
shown in the following figure.

Figure 60 Menu 24 System Maintenance

1.

System Status

2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
15.1 System Status
The first selection, System Status gives you information on the status and statistics of the
ports, as shown next. System Status is a tool that can be used to monitor your G-1000 v2.
Specifically, it gives you information on your Ethernet and Wireless LAN status, number of
packets sent and received.
To get to System Status, type 24 to go to Menu 24 – System Maintenance. From this menu,
type 1. System Status. There are two commands in Menu 24.1 – System Maintenance –
Status. Entering 9 resets the counters; pressing [ESC] takes you back to the previous screen.
Chapter 15 System Information and Diagnosis
System Information and
Menu 24 - System Maintenance
Enter Menu Selection Number:
ZyXEL G-1000 v2 User's Guide
C
H A P T E R
Diagnosis
1 5
113