ZyXEL G-1000 v2 User's Guide
17.3.4 Remote Management Setup
Remote management setup is for managing Telnet, FTP and Web services. You can customize
the service port, access interface and the secured client IP address to enhance security and
flexibility.
You may manage your G-1000 v2 from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
Table 56 Remote Management Port Control
WAN only (Internet)
LAN only
Note: If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 - Remote Management Control (shown
next)
Figure 78 Menu 24.11 Remote Management Control
TELNET Server:
FTP Server:
Web Server:
SNMP Service:
DNS Service:
128
ALL (LAN and WAN)
Disable (Neither)
Menu 24.11 - Remote Management Control
Port = 23
Secure Client IP = 0.0.0.0
Port = 21
Secure Client IP = 0.0.0.0
Port = 80
Secure Client IP = 0.0.0.0
Port = 161
Secure Client IP = 0.0.0.0
Port = 53
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Chapter 17 System Maintenance and Information
Access = ALL
Access = ALL
Access = ALL
Access = ALL
Access = ALL